Search results for query: *

Hi all Does anyone know if these handsets are supported on the NS700? Thanks in advance!

Hi all, I have a ns700, connected to the customers LAN. On this LAN we have our own router/circuit setup for sip trunks which works well. Customer would like to use the media relay but use their own router to route the traffic for the remote extension. One of our engineers had tried to put...

Hi all, My understanding is if over 32 IP/SIP EXTN on the ns700 we need an expansion lic. Am I right in saying I can have say 16 digital handsets plus my 32 IP/SIP before requiring a licence? Ie the dig/analogue extensions do not get counted within the 32 limit for Capacity ? Thanks again

Hi guys, Simple question, how do I prefix CA with a 9 on external calls? Weird issue, some PCs seem to insert it itself and I can just paste the 11 digits in and works ok but most does not. I have ARS ON. I want to be able to dial from outlook and paste numbers into dial field when...

Hi All I have two sites linked (NS700) via IP trunk. Using enhanced qsig licence so each site can see DSS status. My question is can i poulate users in CA on each site so i can see their status on the the other site?

Hi all Looking at implementing a centralised VM solution. My understanding is I need usual DSP/storage/ licences for UM. I will have remote PBXs connected via IP Trunk. For these remote sites do I need an enhanced QSIG lic to enable me to use the centralised vm? Any tips on configuration would...

Hi guys We have had a request from customer who wants incoming caller display disabled. We have spoke to Gamma our provider who tell us they cannot disable at their end ..? I’m looking for way to disable it on the pbx? We have changed the display on the handsets (321) but when listening to...

Hi All Looking for some guidance on the capabilities of an IP trunk from one PBX to another at a different location. (NS700) Client would be looking to have an auto attendant setup at main site, then certain opt would pass to extensions at the other site using the IP Trunk? would that work and...

Hi all I’m looking to be able to monitor the number a busy extension is connected to. So rather than getting busy when the DSS is lit up red it shows the number they are connected to ? Also is it possible when I am on a call and someone is trying to call me and they get busy it would show the...

Hi all We have had a request for a campaign setup on the Panasonic UM Voicemail, we would normally offer this on our Avaya products but have never deployed on an NS series before. Does anyone know if it is possible ie caller gets to mailbox and they are prompted with a series of questions one...

Hi all Is there a log anywhere that will show pbx programming login history? Ie date/time/ changes made? Thanks

Hi all, Looking for some clarification on IP Dect, I have 2 Offices. The two are quite a distance away from each other with a road in the middle of them. On the main site they use 155 cell stations and this works good. Signal is obsolete on the remote site due to the above. I have a VPN...

Hi all As above I have primary /secondary server 300 users load balanced between each server. Servers are on different sites and connect via MPLS. I have around 24 remote sites with 9608 IP handsets. Failover works good but I have a question on network failure. Say the link to main site goes...

Hi all I have a query on a onelook network and thought I’d ask you all here before Panasonic.. I have two ns1000 (master and master backup) failover works fine, I have about 300 ip phones at different locations registered to the master and under normal network conditions (MPLS) it fails over...

Hi Guys If i have an IP Phone and SIP trunks on same codec eg g711, would this no longer consume 2 VCM channels? or would my provider (gamma) need to support direct media connection to do that?

Hi all I had An issue recently with a DT333 on a ns700. The 333 has an ICD key, the group is set to distribute/ring Problem I had was when I take a group call the second group call waiting shows on intercom key. With this setup another group call would normally queue but only show on the...

Guys I have site that has existing traditional dect on NCP500 . They have another site across a very busy road that is about 80m away. They have a reapeter in place but I think the repeater is just too far away from the cell on main site. I am thinking about creating vpn between sites and doing...

Hi guys, Can this be done, when UM AA transfers to extn you get "please wait a moment" Can this be turned off? Also does anyone know if the in built router licence will transfer from master to master backup in onellok environment?

Guys i have a site where customer is looking for dect solution but does not want to go to the expense of putting cells everywhere. I have been looking at the a406 repeater but would this work to repeat the signal from a cell? If so could i repeat the singnal from repeater to repeater or would it...

Hi all I have setup below Calls come in to AA they have 3 group options. Only 2 operators answering calls (its a health centre and short staffed) on each phone I have usual 2ICD group keys per group so they can handle more than one group call at a time if they wish. I also have 3 fixed call...