Search results for query: *

I have a 2000 IPS migration from a IVS. It is using the CP 26 CPU. The onboard SMDR on RS1 of the MP stopped working (RS0 is being used for MCI for IM16 VM) and can no longer output. Tried everything to get that to work except a replacement. Found out that the IPS can SMDR via IP and have...

Has any seen or heard of issues with the DTL 8LD-1 DT300 having bad displays. I recently took over a customer that has a SV8300 and out of 300 phones there are more than half that either have bad upper displays or lower displays. Many have both non operational. I have been testing these phones...

Can anyone provide some better step by step information to help make this work. I keep using the manuals and cannot make it happen. I have a SV8300 with 3 PRI, We need to block some constant abusive callers. I know there was a write up earlier on but not enough information to follow. Any...

We currently have a site that has a SV 8300 with a UCB that is all IP phones with approximately 500 stations this system has been in place working since 2012. We currently have about 20 phones that just DHCP connecting then go to Auto Configuration failure out of the blue. In addition now we...

Its been a while since working on the 8300s but can anyone inform me how to stop unwanted calls from coming in to various telephones. I am looking for a refresher. Customer has specific calls coming into their DID that they want to stop completely from a specific number. Any instructions would...

We recently have had an issue that has occurred with a 2400 IPX phones, specifically analog that when the hook Flash is pressed quickly it simulates Pulse dialing in an area that's not allowed to have calls. Looking for a way to block this from happening Internally. Currently the analog phones...

I have a customer that is down sizing from a NEAX 2400 to a SV9100. This is a secured correctional facility and they specifically want to have a current feature working as close to the same as it is now. The set up is there are 5 RSC classes in the 2400, RSC1 = national Dialing, RSC2 = Instate...

I am looking for insight from everyone. I have an account that the VMP LX-U40 w(the DSP U30 and the 2.0.2.0 CF 512 8) it was loosing its recording storage over the course of 3 months, I performed a factory reset and that helped a little but not enough. We ordered a replacement ( that was the...

I have a customer that wants to have what is called in the SV series as a Long Conversation Cutoff feature for the extensions. They have random calls coming in and the system either does not see the DTMF release or its computer generated and locking up ports for excessive amount of time. Is...

We have multiple locations with the same issue, we have an SV 8100 intergrated to work with a Viper 911 system. The 8100 is used to support and provide the administrative lines to the 911 system and they mirror on the DTL 32 D (admin lines only No 911). We have a Department group 2 built with 9...

Is there anyone who may know the answer to this, Can set relocation be done in the SV 8500 similar to the 8100 /9100 without using cross connects or having to use ASTN and re program all other data?

I have not done this in awhile and need a refresher, if you want to block incoming numbers what commands are required in the 2400 PBX?

I am looking for anyone who has an answer solution for this, NEC forum had limited responces. SV9100 w/Inmail The system is front ended by the AA with no incoming live calls, at the main greeting they either dial a 1 touch selection or ext number, if the ext numbers are 1XX, 2XX or 3XX and...

I am currently trying to get dial connections to 2400 IPX using SV 8500 PC PRO. I can use the PC PRO for direct connects but cannot get the dial up to work no matter what I try. Anyone have any ideas?????

I have recently locked into a customer that has 8 NEAX 2400 IMS/ICS systems. I need to know what type of Laptop computer is required with what OS and the best way to get the MAT software. I believe that it requires a DOS based OS, with Procomm. Can anyone give me more specific details so that I...