Search results for query: *

i am trying to connect Maipu s3100 MyPower switch with putty and unable to login as i dont know the default password and please i want to use it for CCTV cams what configuration it is required Thanks

how do i setup Directed Pick-Up for 500 sets so user see ext 123 is ringng he dials 123 + code to answer or code + DN without puttig them into group or do i need to put all exts into 1 group ? to answer user need to dial Code+DN or DN+Code ? thanks

i connected two nortel cs1K sites through PRI cards distance could be around 2.5KM which i covered with SHDSL ntu 5099b site B can dial within site fine however site B calls are getting dropped within 15 to 20 seconds weather call is ringing or picked digital (m3902)sets do not drop calls. same...

we have two sites i setup cdp which working fine for all other area codes however theses two sites are on same area code on separate e1 if a user calls the call connects/looks for free Chanel on first PRI weather the dialed number is for second site or first in case if 30 chnls of PRI busy then...

we have 2 sites on same location got another e1 for second site i setup pri card for second site with all same values as first one printed in ld 22 cequ adan rdb in ld 21 did in ld 20 stated in 60 and all values are same as first site however second site is not dialing to any out network number...

we have 2 sites and want to joint them so users of second site also can have access to send receive calls. we do not have SIP licence have not trunk card have PRI cards on both sites but not authorized to have another E1 from central office can i use single E1 on both sites distance between...

i need help connecting nortel cs 1k with procom plus what i have is a 25 pin adapter which i can put into PC's printer port the site is used - removed from another site. i dont know its IPs when i boot MGC shows 004 1 (shelf loop) after boot pass etc however i dont know how do i connect it with...

we had two sites on different locations for some reasons we shutdown one of the site and on the order certificate (CS 1000E keycode Sheet) i do see it was ordered for 1 digital card and 14 analog cards digital : 16 class tels : 232 ip user : 26 at the end 26 keycode lines printed A=xxxx B=xxxx...

on my nortel cs 1k i copied 3 more sets from an existing one. One of them is live since i copied however two other sets get disabled every day. i enable them from LD 32 (enlu x x x x) however they become disabled on next day what could the problem

Another rainy day came with another problem All dns have lost dial tone for 500 sets set 3902 have dial tone and working normally if we call from 3902 set to any DN it rings. from dialing side it keep ringing and when we pickup handset there is nothing caller still hears ringing tone please...

i had 2 trunks with loop start they were working fine yesterday however today it is not working when i dial ACOD i dont hear any dial tone even no noise or battery tone if some one call on line it rings on console (Auto terminate DN is set to 0) however when operator attends the call nothing...

i added a Third party phone line as COT we have two types of sets configured 3902 these can access ACOD and can dial through working fine however 500 sets do hear tone of that line when they dial access code! but when they dial any digit it returns a fast busy tone how can i allow 500 sets to...

i need help to disable CLI feature for a specific/single DN so that DN will not be able to see calling party name and number on which load i go thanks

in our old setup we were given an feature code to lock the busy extension this worked as extn 123 calls extn 124 124 is busy calling party dials 6 and ends call as soon as extn 124 released from call ext 123 receives ring once 123 pickup it rings to ext 124 is this posible in maridian cs1k...

CS1k our system is totally local under our building and now we got 2 new lines of our national telephones i want to add these 2 line into system so operator can forward a calling extension to national network through those 2 lines. although there is already one exists. i check under element...

we have around 250 lines exchange 100 of them setup with 3 digit DNs 111 and the rest are programmed 5 digit 35555 3 digit intercoms have all the facilities as 5 digit numbers however they can not receive calls from outside the network i want them to setup something like if an outside caller...

Previously we had an old telephone system where we setup numbers like 3123 four digits we recently got installed CS1000 nortel system with nortel we setup five digit numbers like 35555. the problem is calls coming from outside are redirected to operator if someone dials a wrong number mostly...

i want to setup a small telephony system through computer, i will install ubuntu or linux and asterisk however i dont know which hardware i need to use which will out lines/numbers during google i found some PCI cards but max provide 24 telephony jacks and i need more are 50 to 60 secondly these...

we have Nortel m2250 running very well with 200 phone lines i want to setup local area network over this system something like ADSL i don't need to connect it to internet jus want to setup a LAN so we can establish an own webserver (appache) to host websites available to local network not over...