Search results for query: *

I have been trying to get SRTP media encryption to work on my SIP trunk connecting my Avaya Aura CM 6.0 to an ACME Packet Session Boarder Controller (SBC) managed by another agency. They configured the connection on the SBC red side as transparent to allow the CM to do the encryption. I've set...

Hi folks, I need some help with some steps to setup a non-ISDN T1 trunk on my Avaya Aura CM using MG450. The trunk is to connect to a customer PBX to allow a channelized trunk to pass 3khz voice lines to use my switch as a gateway to place external calls. I tried setting up a ISDN PRI, but it...

I know I can program a autodial to an external commercial number, but is there anyway to have commercial numbers show as bridge appearance for incoming calls? I am trying to work something out for our Fire Department where their dispatch can receive incoming calls on a commercial number they...

Anybody know what this event means and if there is a fix on the switch or is this something external like from the network?

Regarding thread690-1670813, after you enable Station Hunt Before Coverage in system-parameter coverage-forwarding, How do you configure the stations to hunt in a chain? I have three stations in a coverage path, and the call always stays ringing on the last station. If I add the first number...

I administer a Avaya Aura CM 6.0 and I have been trying for the longest to figure out how to program the system to automatically set Call Forward Off-Net for a specific extension after working hours. Has anybody done this that can point me in the right direction? That is, assuming that the...

Having problems configuring an Ultratec Uniphone Combination TTY and Telephone device for a customer that has an employee with hearing impairment. Configured the line as analog since the device connects via regular 2-wire analog line according to the manual. Has anybody out there been...

Anyone had this problem pop up on your radar all of a sudden? My phones all of a sudden started displaying backup failed messages that flash at the top of the screen every so often. I am using a Avaya Aura CM 6.0. I remember having this problem before, but not quite sure what cleared the...

Gents, We have an Avaya Aura CM 6.0 switch with the following persistent alarm: MIN MAJ Server No Yes CommunicaMgr No Yes CommunicaMgr Alarms: ID MO Source On Bd Lvl Ack Date1 EXP-PN PN 01 n MAJ N Thu Jul 09 08:05:31 AST 2015 Server Alarms: ID Source EvtID Lvl Ack Date Description 1 SME...

thread1496-1701032 Regarding this referenced thread; I am having a somewhat similar problem or appears to be similar. I am curious how did "avayastrongman79" corrected the problem? He stated, "There was what appeared to be one way RTP across the SIP trunk due to an incorrectly programmed...

Need some advice/guidance. I am having trouble routing an incoming call from my SIP trunk to an E&M trunk in my Avaya CM6.0 switch. The caller can place a call successfully when the call comes in via my ISDN trunks. However, when the caller comes in via a SIP trunk they get a fast busy or...

I'm new to the Avaya Call Manager ver. 6.0 and was ran through a one week crash course on administering one. Slowly gaining some experience, but I'm still green on some areas. Trying to figure out how to enable privacy between bridged appearance calls. I enabled exclusion and it appears to have...