Search results for query: *

Hi to all. I'm helping a friend on a Partner ACS 3.0 with a Partner Voice Messaging PC card R 2.0.1. System lost power and batteries were dead. Have sense replaced. Biggest problem is all calls are being picked up by the AA. From reading this site, I have done the #505 for port 78 and 79...

I have a used Norstar Polycom conference phone that is suppose to work as a direct connect. We have a 0x32 Mics. Can someone please tell me how to configure? I have dial tone but get a fast busy anytime i try to make outbound call. Any help is greatly appreciated

Added 2 new stations with 2 dedicated lines, do not want to add these stations or lines to AA The 2 lines are programmed to ring only on these 2 stations and both have mailboxes set up. Would like to prgoram the lines so that if there is no answer, it will go to the voicemail of one of these 2...

wonderful site i want to build a ccr tree with 4 options: press 1 for sales, 2- accounting, 3- hr, 4- general delivery i would greatly appreciate any guidance have never set up one of these but somewhat familiar with these startalk flash voicemail

I want to reconnect the Startalk voicemail to the Mics. When i took this system out of a closed building, i noticed there appeared to be 2 lines directly plugged into front of the voicemail. Would i need to connect my main 2 lines to this startalk? Im pretty sure i can program alot of the...

good day. i have 0x32 that i removed from an old office and put up in our office. the previous office used a trunk module in addition to the system. i only have 3 lines so i am assuming i dont need a trunk module? i have system up and running with 2 lines, but i cannot get a third line to work...

I have a CP100. Im trying to change one of my auto-attendant greetings but when i listen to current message and try to erase and re-record, i get a message indicating out of space. I'm lost

I have to replace a faulty 0x16 station module - used with 0x32. My goal is to keep the same DN's/extensions. I'm somewhat familiar with programming the MICS, but have never changed out a station module. I'd appreciate any guidance. Thank you