Search results for query: *

Urgent request! Does anyone have two (or three!) working singlemode units (1-2 superloop - or more) that they want to get rid of ? I'm rather in a pinch with a run of multimode going away due to construction (been working fine, but don't have an alternate path, except for singlemode! and...

If one was planning a hybrid system, should you consolidate your existing cards (digital and analog) in the lower number shelves (in my case, 4 - 0, 4 - 1, 8 - 0, 8 - 1, and 12 - 0, 12 - 1) ? or does it matter? I'm not clear on how the UCx sees the MG-Xpec gateway and shelf, and card numbering...

Does anyone have their CP 5.0 Language CD's available? I need to reinstall callpilot 5.0 201i and can't come up with a CD onsite.

I'm going to ask the dumbest of questions, but what exactly does the Callpilot 5.0 installation CD say on its face? I have an "Applications" CD and a "Desktop Messaging" CD in the envelope. I'm assuming the system CD says something like "Installation" or "System" ? I was considering doing a...

Does anyone have the part number for the IPE Module to IPE Module vertical power wiring harness (brown,blue,white,orange,green wires with modular connectors both ends - one tap-off for the shelf power supply) - this is for an AC powered switch. I've looked all around the existing cables...

We would like to eliminate a telco T1/PRI between the two pbx at the two sites and use the 2911's as the T1 extender instead. So it would be: PBX < - > 2911 <-> Private Ethernet <-> 2911 <-> PBX I'm a PBX guy learning the Cisco world, so a basic example config would be very helpful - the...

Got a bunch of these this morning after replacing a dead CE power supply on a 61c running 4.5....any thoughts as to what might be causing it? They eventually stopped....but... BERR007 CP BIC BERR: addr = 0x13020880; BERRZ = 0x0020; BERR003 CP IPB Master ERR BERR705 EXC 1: Bus Error in Task...

I know this is "old school" equipment at this point, and I have a spare IODU/C unit (rel 6); just looking to acquire additional units for a crash kit (long term disaster recovery) - I'm running a 61C (motorola's) rel 4.5 with IODU/C units at release 6. My question: What's the highest...

Early Morning for me this morning. I found the light off on the CE power supply CPU Shelf 1; but most of the cards on that shelf were still lit up....(mostly red!) I was wondering if it was really the CE Power Supply, or something deeper.... Thanks for any insight anyone might provide! 61c Rel...

My First Post of the New Year! Here’s a note for anyone who has an older large system (4.5 and older with Motorola processors and floppy drives) and needs to do remote backups. Some of you more knowledgeable contributors on this forum may already be aware of this, but I’ve done some extensive...

Has anyone seen Err5306 be something other than a bad port on a card, or wet pairs? Is it possible that it’s one of the common cards? Conf/TDS or DTR? Guesses? I’ve been dealing with an intermittent problem (not the 61c rel 4.5 grounding – it’s perfect according to the NTP’s) that seems...

I’m opening this new thread because a couple of folks were intrigued by a system I developed for my own use, but have now rolled it out to some staff members. I started to hijack another thread with this conversation, so I’m starting a new thread so it can stand on it’s own. I’m fairly old...

I've many analog lines hanging off a 61C release 4.5. For the past month or so, a few fire alarm dialers have reported dialing or DACT failures - of course I checked out the analog voltages for on and off hook - no issues, can make calls with a butt-set no problem. Blamed the fire alarm panels...