Search results for query: *

Hello guys, My company has bought around 10 CP600 phones, and it was discovered that all the phones are SIP. (V1 R1.7.0 SIP 161129) So, many of the basic features do not apply,Callback for example (i have also tried to callback a SIP phone from HFA, and it did not work). So, I am asking for...

I need to configure a SIP Link between my HiPath 4K and my OpenScape Business V2. The thing is, I have problems in both of the configurations. - For the HiPath 4K: I have the configurations, for configuring my STMI card to operate 120 HFA phones, 120 SIP phones and 10 SIP trunks...

Okay, I do not know if it is a problem or not. But when I program a key on an IP set (OpenStage 80) as a repdial key with LED (say 3000), if someone is calling 3000 (and it is flashing in my extension), if at this moment i press the repdial key, i get connected , not to the 3000, but to the one...

Hello, I have a DID service over DIUT2 card (analog) that I need to display caller ID over it. I have arranged with the service provider, and they have told me that the feature is now running, but I still get the "DID" message instead of the caller number. Is there a parameter that need to be...

I need to upgrade my OpenStage 60 HFA phones to the latest version compatible with my OpenScape Business X8. After checking the compatibility, I found out that I need HFA V3 R0.23.3 I cannot find the software, if anyone have it. And I need also the steps of upgrade (in details please). Thanks.

In my HiCom 350 system, for retrieving the REGEN file, after I make the Vegas and Regen steps, when I click the Start Local File transfer window, I get an error of (connection not accepted). Is there some parameter that needed to be entered?

Hello, I would like to register a SIP softphone (from mobile) to my HiPath 4000. but all the applications on the mobile keep asking for username and password. What username and passwords are these?

Hello, I have an STMI4 - Q2324-X500 card that will be used for HFA, SIP phones and SIP Trunking. The thing is, I do not fully understand the parameters of the BFDAT command. I know that LINECNT is used for the number of circuits to be configured, so that if i want to configure 60 SIP phones...

I'm trying to install a SIP phone on my HiPath 4K. The thing is, I am currently running HFA phones, and it works perfectly. but when I try to configure the SIP phones, it requires some parameters on the phone like: - SIP Proxy - Outbound Proxy - SIP User ID - SIP Auth ID - SIP Password - SIP...

Ok, I have problem with the Manager e dialing rule. I'm very good at the ComWin configuring the dial rule, from the LODR Ammo, like Echo, Outpulse, End, etc. But I now have to deal with the Manager e, which has a different configuration methods. I do not understand the codes C, E1, A, etc. the...

Is it possible to configure a hotline for more than a destination? Meaning when I Pickup the handset, it will ring automatically in more than one telephone (like 4 stations) in the same time?

Well, for a HiCom 350, a new problem suddenly appeared. Features like FWD, alarm, etc. have stopped working from the codes on the set, meaning that the feature can be used but only using the programming of ComWin, but when trying to do it using the codes (*48, *55, etc.), it gives not possible...

I have a HiPath 4000 with STMI4 programmed for IP Phones. As I know, I can only program the STMI4 card either for IP phones or IP trunking. Can I know the steps to program the IP Trunking?

I am connecting my HiPath 4000 with HiPath 3800 through PRI. I used to use the protocol ECMA1, and it was working very good. but after resetting the 3800 module, using the same exact configuration, when I make the call from the 4K, it gives me (dial again) message, and when I try to dial from...

Is there any kind of a mobile applications for the HiPath 4000 I can install it on my smart phone, so that I can use my mobile phone as an ordinary station?

I need to know if there is a possibility to add (or change) the number of the calling phones. Actually I want to insert number to the incoming call from D.I.D.

I have a problem on a PRI line, it is programmed as a DOD line. I successfully can dial a local and long distance calls on it, but the problem with international and mobile numbers to be dialed (which have longer digits that the local and long distance calls), I get a (Please Try Later) message...

I need to ask if I want to connect a Prime Cell to my HiPath 4000 (for mobile access). Does it need any kind of special congiuration, or it will be like an ordinary external line? (in TACSU, I use DEVTYPE=TC, DEV=ANMOSIG)

I need to ask if there is a searching mode (linear, circular) for the TACSU units in the same TGRP. It exists in the TDCSU, where I can choose the order of the channels (for the PRI for example), to be either linear(ascending, descending) or circular in the parameter SRCHMODE. But in the TACSU...

Could I please know the steps to program a DOD card on hipath 4000? Thanks a lot.