Search results for query: *

I have a customer that was running MM12.14 and is now trying to load MM12.11 and is running into issues. I have always been told that you can use any 12. tape as long as you are running 12.xx software, meaning you can not use a 12.xx install on a system running 13.xx software. Sorry for the...

I have a few IP 2033 Conference units running Unistim 2310S97 and I would like to upgrade them to 2310S99. I am using Pumpkin on a Windows 2013 server that works well to upgrade my 1140's and 1120's to the newest firmware. I manually configured the 2033 with the TFTP Server IP address, it boots...

Does anyone know where I can get a copy of the 5.0 software for the 1002rp Rackmount Server?

Does anyone have a copy of the latest firmware package, or v1.40.62-0665? I have a 1006r here that I replaced the midplane in and the replacement has some outdated firmware.

I have a couple 703t's here in my warehouse and when I do a fresh install of CP 4.0 I am getting the message "Must activate windows" after startup and logging into the system. This is the 1st time I have ever had a CP Server ask to activate windows. This is happening on different 703t's and even...

thread798-1732903 Hey guys, I am looking for firmware for the M39xx sets. Particularly 9.4 for the M3904, 8.9 for the M3903, and 8.4 for the M3902. Can anyone help me out? Thanks in advance

Hey guys, So I have 2 of these CP 1005r servers here on my bench and 1 of them came in without HDD's. So I placed 2 brand new HDD's in it, fired it up, inserted the CP 5.0 install disk for the 1005r, completed the install, and now every time it boots I get the "NTLDR is missing" error message...

Here is my issue, I have a ShoreTel IP230 manually configured as follows: FTP Server - 172.22.128.5 Static IP - 10.3.139.23 Subnet - 255.255.255.0 Gateway - 10.3.139.1 Someone set the password on the phone and there is no way to access the configuration menu. My network is set as follows...

Does anyone know what M39XX firmware comes standard on what system Rls? I have 4.5, 5.0, 5.5, 5.0, & 7.0, but I don't know what firmware comes standard for the M39XX phones. What I am trying to do is locate at least F/W 8.9 for the M3903, then put the system together and push the firmware down...

So I got a shipment of IP230 phones in along with some Shoretel switches. When I worked on the Nortel 1120/1140 phones I had to update the firmware from SIP to Unistim before any of the default factory reset and other functions worked properly. With the ShoreTel 230's I can't seem to get passed...

So I got a shipment of IP230 phones in along with some Shoretel switches. When I worked on the Nortel 1120/1140 phones I had to update the firmware from SIP to Unistim before any of the default factory reset and other functions worked properly. With the ShoreTel 230's I can't seem to get passed...

I am trying to reset a 5.5 system by installing fresh new software. I have the software RMD in the front face plate. When the system is turned on it asks me if I want to boot from the front faceplate drive and a bunch of dots progress across the screen. In the past I have just hit the "F" key...

I am working on the Nortel 1120e and 1140e phones. I have about 100 of each and have set up a tftp server with the current Unistim firmware for each. I set the provisioning server in the phones to my tftp server address (192.168.1.123) and enabled DHCP in the phone. The majority of the 1120e's...

I'm working on a 1006r server and it seems that I can not get the Raid Controller to work properly. I have 2 HDD. Slot "0" there are no lights showing, slot "1" has a solid green light. I have swapped drives and the same thing happens, no lights in "0", green light in "1". I have re-installed...

I am bench testing a Nortel 703t Server here in my warehouse and I have just installed a fresh copy of the CP 5.0 703t Image software. The server boots up and I am presented with the windows 2003 Server logon screen. I have no idea what the username and password is? Can anyone help me out? -Crash