Search results for query: *

Hi Guys, I need a help please, Still a beginner with SIP trunks, I have configured and connected a VoIP GSM gateway to our Mitel 3300 as a SIP Peer, The link is established and up, When making a test GSM calls from Mitel to the gateway, the CCS trace shows that Mitel doesn't out pulse the...

Hi guys, kindly I need your advise please, our system is 3300 Mxe, running old software (Rel.5), it serves mainly analog lines beside few digital and IP lines, The main Company phone number is routed to an Auto Attendant (20 port embedded), which greets the calller and asks him to enter the...

I need your help guys, please help First I apologize about the long getails, In 3300 Mxe version 5.0 Mostly Analog lines are configured on it, *- Two VM ports were removed from the VM group and assigned as RAD Ports,(8018,8019). Recorded the greeting on them and assigned the greeting sets 10 and...

Hi Guys, I need your suggestions please, i have 2 (A&B) 3300 in remote sites, connected to each other via internal SIP trunks, it works fine for Ext.to Ext, since we have limited CO trunks on both systems, I use each CO trunks of system A as a backup for B and vice versa when the trunks are busy...

Hi Guys, Anybody can help in solving this issue, Trunks are configured well, between my end and the service provider, Marlink, I can call outside it rings at the destination, but no audio when the call is picked up, the same thing with incoming calls, Any suggestions guys? thanks,

Hi guys, I have two MXe systems in 2 different locaions, I am using IP trunks to connect the systems to each other, it works fine, due to the company cost reduction plan,we want to use one TDM trunk group only of one system A, and route all the calls (TDM) from the other system B to A through...

I have two 3300 located in a remote sites,joint to a cluster, the two sites are connected through IP trunks, each one has limited CO trunks number, one of them -Site A- is busy during day time and the other -B- site is busy in the night time, would like to utilize the the free trunks of site A...

Could any body advice if there other IP phone brands that are compatible with Mitel,tested and have been in service could be recommended? Thanks,

I am unable to involve the third party in a conference call, all the parties are analog lines connected to a 3300 via a peripheral cabin, Berkshire 800 phones are used, all the recommended settings in the system options and COS of the are set properly, The phones flash well, I can put the...

I have an MXe system with redundant HD, one of the disks was taken out for a couple of weeks, during that and due to power failure, the system was rebooted many times with a single HD, recently when the other disk was re-put and made the mirroring process, the rebuild went smoothly, but at end...

thread1329-1568493 We have two 3300 ICP located in different area, and would like to connect them together through SIP Trunks, both systems licensed for SIP Trunks, currently they are connected via IP trunking, they work fine, SIP trunking will be the second alternative in case the IP link...

I have 4 Peripherals connected to a 3300 ICP, everything went smooth til i have noticed that some analog extensions prorammed in some ONS cards do ring when calling them, they can call out, they hear only one ring then keep quite, nothing particular in the Logs? Any Idea how to protect the...

the wake up calls fail on all our stations and there is no any clear reason in the logs explains this case, Is there any limitation on the number of station that could be ringed at the same time? i have around 400 stations in the system and most of the users set their timer to ring at the same...

I have configured one of our IP phone as a Resilient set, the home element recognize it as resilient, but the secondary element is not, in the Remote DN of the secondry site, the set number is displayed without the Secondary Cluster Element Index,recheked the config. according the guide...

Any configuring ideas to connect 4 channels GSM GoIP to the 3300? There is no option to program SIP trunks on the GoIP, Thanks,

we have 2 3300 systems in a Cluster, both have their own trunks, we would like to get each one shared its trunks with the other, meaning when all system A's trunks busy the call step over to system B and take a free trunk from the free ones there, I made a route list for this with the required...

Message Phone" displays on a superset 4025 in a 3300 ICP and flashing the Message indicator, no messages in the VM. tried to deactivate it by the feature code it is a callback message, any idea how to turn it off, Thanks,

Any idea where to check and stop the CO calls from transferring back from the destination (Ext.s) to the console (Recall - No Answer)displays in the console when the ringing time expires? FYI, no alternative routes are programmed for this case, Any advice??

I'd like to add a new Peripheral cabinet to the 3300, when i assign a unit number for the new cabin, a big noise devlope and a message comes up in the log telling dublicated cabin number, i checked the system and found all the available unit number2 are reserved in the NSU form, when there is...

The routed calls to the attendant after Call Reroute No Answer time expires, reach the consoles with strange case; the operator can hear obviously what is going on that office, which the call was routed from (speaker on), when the called party do not know this, this case apply for both analog...