Search results for query: *

Hi, I had a previous post about the use of BIX test clips. All replies were helpful. Here I am here again with another BIX subject. Very large install which currently has a frame in the middle of the MDF. All blocks are BIX. Some of the old cabling is in the process of being removed. Cables and...

Hi, Recently replaced an older Mitel phone system. Previous setup customer had lost vmail and cards were starting to die on a regular basis. Replaced with a ComXchange system using gateways (ATA) as the analog side of the system. The hotel has a Motorola TS-524 which rides over a selection of...

Hi, We have been asked to replace an NEC NEAX2400 IMS system. Large hotel of over 1000 rooms plus also has remote units either in the form of another NEC2400 or DCU. Not much information out there on the DCU. Do they supply DTerm (x23) only or can they also add an x amount of analog extensions...

We have an old Meridian System we are in the process of replacing. The operators are using a "PRS 150 Voice Announcer" Q-Voicesaver Clear Concise Consistent. The operator phones are being replaced with Polycom phones. I am interested to know the setup of these devices. Does anyone out there know...

I have a TDE200 and a TDE100 linked via a fiber link. 2 Buildings on same property. Two different addresses. TDE200 has the LCOT that all calls are routed through. 2016 is the year that Michigan schools with Multi Line telephone System needs to comply with e911 service. Being able to identify...

BELDEN A0270166 BIX TEST PROBE, SINGLE PR W/CLIPS I have come across a site that has BIX IDC for all terminations. Not had much to do with BIX other than the odd punch down here and there with BIX punch down blade. I am looking at the above test probe. Does anyone know if this test probe...

Hi, I am in the process of replacing an HCX5000. Know next to nothing of the PBX. Part of the process in doing this we create a port map of all analog extensions at the blocks at the cable coming from the PBX. We try to use existing cable connectors where possible and we simply connect our 25...

We will be replacing the mentioned PBX. From photos received there is a main module appox 9 ru in size. This I assume to be the control unit. Above this unit are the analog units. A total of 6. These seem to be 2 ru in size. The new system will be using the existing amphenol cables connected to...

Hi, Looking for information on the subject PBX. What gender are the connectors on the rear of the PBX for analog station. Amphenol 25p ? If I were to purchase a cable for this system what gender would my cable need to be to connect to it. Also, does the system use use 24 ports or is there a...

Hello, Looking for information about cabling and possibly cards. Customer has system which is being ripped out. Replacing the unit and hopefully using existing cabling. There are 515 analog extensions in use. From photos there looks to be 5 cabinets/modules stacked. Unfortunately they did not...

We have a request to replace a system in a hotel and installing another (different) system hopefully using existing cabling for the hotel analog room users. My question is, what gender is the cable connector. The cards installed are a number of NT8D09AK. I belive it to be an Option 11 system...

Have been working on a hotel Mitel system. Following the cables to the 66 blocks from the rear of the Mitel system. 66 block have been wired and looking at the pinouts the 13th pair is not used. Does the Mitel system have 2 separate cards. 12 port card for 1st 12 pair and another card for the...

Looking for information (advice) on SIP trunking. I am looking at replacing an old Partner ACS system with a TDE100. Currently has 6 pots lines. Request for SIP trunks and customer needs each Room ext. to show own caller ID for 911. My understanding is that I can request the 6 pots (trunks)...

I need to ship a cable but unable to get the info required. PBX tech on vacation but customer would like the cable onsite for tech. Not sure if replacing or expanding. Normally we would send 25 pr amphenol (male) cable but would like to confirm. All pics on internet not clear enough to make...

Hi, Relatively new to shoretel. Would like to take the demo kits to customer site but would like to change ip scheme of demo to connect to customer network and at one remote site register a phone over an existing vpn. Is this eay to do, any advice appreciated.

Two TDEs networked and call is received and answered by TVA200. User dials extension of remote TDE. Caller ID is not presented. Is/can caller ID be transmitted over network to Extension. Local incoming CID is OK. Any call transferred over IP trunks does not display CID. Any thoughts?

If a TDE is using LCOT8s and receiving lines via an AudioCodes device. Can the Panasonic send out CID from specific extensions. I know I have done this with PRI but can it be done via LCOTs. Another option I may have is to remove the Audiocodes device and register all lines as SIP trunks then...

I have another site which is thinking of IP phones. Two sites linked via fiber. Replacing Merlin Legends. Thinking of possibly two NCP1000. Anyone have issues with using NCPs. First report is 144 Extension at main site and 96 Extensions at remote site. All new phones will be needed, SLTs will be...

Can I network a tde200 and a tde 100 on the same network, using a fiber link with fiber/ether transciever.

I have a system which is having disconnect problems. I know I can test each line using the console or go to system and test at dmarc. Can I test from a user phone which may or may not have line buttons. Dialing an access code to a particular line. 801, 802 etc. I suspect my problem is with the...