Search results for query: *

Running IPO 10.1.0.2 Essential. IPO and phones (mix 9608 and 9608G) are on dedicated cabling and switch. One phone out of 45, displays just a phone screen-see pictures. Exit on the 2nd picture reverts back to the first picture. Phone reboots every 2 to 3 minutes. I have deleted the user/ext...

I have a Snom D735 phone with a, Sennheiser office runner OR BS – US headset. The headset connects to the PC using USB and to the phone using the CEHS-SN 01 adaptor by Sennheiser. The setup works well except on incoming calls the phone rings ok but the wireless headset does not. I can still...

I have a Snom D735 phone with a, Sennheiser office runner OR BS – US headset. The headset connects to the PC using USB and to the phone using the CEHS-SN 01 adaptor by Sennheiser. The setup works well except on incoming calls the phone rings ok but the wireless headset does not. I can still...

I have a few IPO V2 Essentials systems running 10.1 and 9.1 for at least 2-3 years with no problems. All systems use the 500 V2 for DHCP, are on separate switches than the data LAN, use 9608 or 9608g phones, the VoiceLAN is on its own segment on the SonicWall and the segment does not have any...

Has anyone used the DECT 3730 HANDSET with the Avaya Standard Base Station DECT IP RBS V3 ? Has anyone used third party WiFi phones -Ascom i62 or Spectralink 84? Thanks in advance

Is it possible to nest hunt groups with automated attendant? IE: Call rings Group 1 for 15 seconds and overflows to Group 2 for another 15 seconds, then AA I got it to work from Group 1 to AA with no problem, but when I add Group 2 as overflow (with the overflow setup from Group 1), the call...

Ok to use for a new system (not an upgrade) with embedded voice mail? Has anyone experienced any problems? Thanks in advance

I have a few IPO 500 V2 systems running 9.1.5 essentials mode with embedded voice mail. The vm copy feature works ok for messages around 30 to 40 seconds but is unreliable if message is over 60 seconds. Original message is ok but after copied to another ext, is either cut off or does not play at...

New 9.1.5 (latest service pack) system with embedded voicemail. Collective call waiting on a hunt group with 4 phones is not working-acting as a collective hunt group, the 2nd call is not alerting on b=. All phones have 4 call appearances, call waiting is on for all the phones in the group...

I have a few IPO 500 V2 running 8.1.67. What is a stable 9.0 version I can use. All of the systems use embedded vm either basic or essentials Thanks in advance

I have an IPO 9 with 2 combo cards and a V-2001a with 2 speakers. Paging was working great by using an analog port set as paging speaker with short code: *78 Dial Paging 207 0 After a reboot it stopped working. I have tried suggestions from thread...

I have an IPO v2 8.1.67 with embedded voice mail. The system only saves messages that are longer than 3 seconds. Can I change the 3 seconds to 5 or 10 seconds to avoid having a voice mail every time someone hangs up? Thank you in advance

I have an Avaya Ip Office 8.1 (67) with embedded voice mail and essential edition. I enable/disable call forward unconditional from my 1416 phone and all works ok. Sometimes I forget to enable call fwd before I leave the office and I have to vpn to my pc and enable from manager. Is there an...

I have an Avaya Ip Office 8.1 (67) with 2 DS8 modules (Slot1,2) and 2 Combo cards (slot 3,4) using all 8 analog lines. I have setup trunk to trunk transfer -forward unconditional- to forward calls to cell phones. The feature works good with no problems - client calls in, AA picks up (AA picks up...

I have a Partner 8.0 with 10 18D phones and looking for a reccomendation on call detail reporting software to create reports such as: Incoming/outgoing calls per extension Incoming/outgoing per day or date range Thank you in advance

Installed IP office V500 v8.0.18 in partner mode with combo card and 1416 phones. Caller ID does not work; phone display just reads "External" on all incoming calls. User had an Avaya Partner V7 before and caller was working. Lines are set to loop start with ICLID and Long CLI option is checked...

I have a client with an Ip Office V500 v2 v8.042 with 15 Avaya 1608 phones. Clients wants to disable or restrict access to the Contacts, Menu(A) and features button. Is this possible? Thank you in advance.

I have 650 Ft of 12 strand 50/125 laser enhanced MM OM3 fiber connecting 2 Dell Powerconnect 6248P switches with 10GbE uplink modules and 10GbE SFP modules (Dell Part Number 330-2405). The connection works great with all fiber strands; no problems. I purchased 2 additional Dell 6248P switches...

I have an IP 406 v2 v4.1.9 with: (1) Analog Trunk 16 V2 v6.1.9 (1) DS30 V2 v6.1.9 (2) Phone 30 (V2) v6.1.9 Embedded voice mail 5420, 5410 digital phones Can I restore the config from the Ip406 to the IP500 V2? What is the recommended upgrade path so I don't have to re program the IP500? Thanks

I have an IP Office 406 V 4.2 (20) with two 5420 digital phones (x203, 204), one Konftel 300 (x201) analog phone and three analog lines. I have problem with initiating a conference call (internal or external) from the Konftel phone. When I join the 2nd party, it puts the 1rst part on hold. When...