Search results for query: *

Hello... So far on this guy I have figured out how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's. I have looked at some documentation out there and I cant...

I have a weird situation At one of our remote offices I was told to check out the network for slowness and this is what I saw on the switch stack *Mar 6 01:03:59.793: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down *Mar 6 01:04:01.807...

If I have two VLANS and two outside interfaces, and currently both are routing over a 10MB circuit. vlan 172 ip address 10.10.10.1 255.255.255.0 vlan 173 ip address 10.10.11.1 255.255.255.0 currently both are routing over the 10MB circuit 66.65.67.2 255.255.255.252 if I wanted to create a...

I am new to this IPv6 stuff... We are looking to test that in our environment. The company I work for has a very small IT department we have about 250 network devices that includes switches, firewalls, routers, loadbalencers... we dont qualify for a /48 block from ARIN because of the size of...

Hi All, We are getting ready to implement tacacs into our network, and I came to a problem. We have over 300 devices to upgrade running EIGRP. The subnet that I have been given to use for loopback address for tacacs source is 172.10.10.1 255.255.255.255 The problem is that I have to put that...

Hi All, How can I get this NTP stuff to work. I took a position for some guy that has previously configured this and left if broken. ntp logging ntp authentication-key 2 md5 04753F363B345E400C0B09 7 ntp authenticate ntp trusted-key 2 ntp source FastEthernet0/0 ntp update-calendar ntp server...

Hello We are deploying a centralized authentication method in our environment, and I am running into some issues with tacacs server. I have a router in out lab that is local to the network (meaning it resides on the same subnet as the tacacs server 10.10.250.0 network) I am able to authenticate...

Hi All, I was given a task at work to configure tacacs authentication server for our network devices (cisco routers and switches) but I have no idea where to start. I was given access to a 2008 Windows Server Enterprise edition R2 and told that I have to make it work. Does anyone have any...

HI All, I have a 7200 VXR series router and I have lost my flash card, once I got a new one 128MB card and pooed it in there I get this rommon 2 > boot boot: cannot determine first file name on device "bootflash:" rommon 3 > boot boot: cannot determine first file name on device "bootflash:"...

Hello At my work we want to expand our coverage by implementing a wireless router. That router will be hooked up to a 2960 switch running dhcp I already created a VLAN and assigned a dhcp pool of 10.10.10.16/28 to it. We have a Linksys E1000 wireless router. It has been some time since I did...

Hello I was wondering if there is a copy of Cisco IOS for 1841 available anywhere that will support Ipv6? Currently I have this seen below ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) R1 uptime is 1 hour, 55 minutes System returned to ROM by reload at 19:11:41 UTC Fri...

IS there a way of creating a junk for a native vlan on a cisco switch? Thanks

Hi All I have a newer cisco1841 router, I havent used it much. Today I tried to boot it up and after it goes through the steps it hangs on this message Press RETURN to get started! *Jun 17 22:56:12.335: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized *Jun 17...

Hi All I have installed Windows server 2008 Enterprise edition on my PC, and I dont get the resolution I had before on Windows 7. The resolution I currently have is 1024x768, and 600x800.. How can I get more options for usage... I have a 22" wide screen monitor and this resolution is not going...

HI All I have installed a new copy of Windows Server on a seperate hard drive (Z:) that is a slave to my Windows XP (C:) How would I go about moving the Z drive to be my primary, This is installed on an older server and We no longer need the C: drive because of it's low capecity. So basicly I...

Hi All How can I extend my logs? What I mean by that make them go longer. Curently I dont have a syslog server in place.. im planing on putting that in later on, how can I get the logs to display more logs??? Thanks

HI I was wondering if someone could explain the output of "sh ip arp" command. I understand some part of that output but im not sure about the Age (min) colum. Here is an output from my router. it says that ip address 192.168.2.6 has 1 min Primary-Router#sh ip arp Protocol Address...

Hi At work I am not able to view logs on some of the routers This is the message I get salR1-351#sh log % Incomplete command. salR1-351# I do salR1-351#sh log ? % Unrecognized command salR1-351#sh log I am restricted to view the running configuration on this router but no one here...

was wondering how many questions are on today's CCNA exam if I wanted to take it tomorrow? I heard for the first time takers that they have to take test A and Test B, but how many questions per each? What are the questions like? What is the passing score? Any additional information would be...

HI I was playing around with SDM that is installed on my router but every time I try to get to it via the browser I get that the Certificate is invalid. When I clcik on continue anyway I get to the login screen, I put in my username and password, and it opens up another window (pop up) where it...