Search results for query: *

Hi All, Please does anyone know how to enable call back between TSE and TSW? I have been trying to get this done and its just not working, I have callback working between all my sites running MXOne TSW sites. Below is my configuration on both systems TSE side DEST DRN ROU CHO CUST ADC...

hi all, i have IP Trunks between two of my sites and i need to enable call back feature across trunks. how do i get this working? below is the route parameters at one end <ROCAP:ROU=21; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 21...

Hi all, i have the alarm below in one of my systems, i have changed out the Power board,DSU,LSU and LPU5 boards but the alarm is still there any ideas on what i may be missing out? 102 POWER FAILURE DETECTED BY DSU DATE TIME ALP NOIF EQU INF1 INF2 04JUN10 08:15:17 3...

Hi all, i have VOIP trunks between two of my sites, one site depends on the other for its PSTN calls but the intersite PSTN calls have only 4 digits display while PSTN calls from the local site(site with the PSTN connection)has the full PSTN display. i have number conversion on both sites,below...

Hi all, i am trying to configure CIL over ethernet, i have done all the configs but when i print, my output is as below <CLDFP; FILE ADMINISTRATION DATA FILE STATE NPPLOG ACT IODEV/PATH USER DEVICE STATE PRIORITY CIL-ETH CIL-0 READY/NOT STARTED...

Hi All, The rectifier fluctuated and the system went off and came back on, now all the ext on all ELU29 on LIM2 of the MD110 does not ring out again. i have restarted the LIM,TMU,changed the cards(ELU 29 and TMU), i have even restarted the exchange but the problem is still there. Does anybody...

hi every one, please i'd like to know if ELU32 supports SIP, and if so guess that means it can interface with other vendor ip phones right? thanks all.

hi guys, i need to program keys on analogue phone (dbc 4187), any ideas on how to achieve this? thanks in advance for your response. -phrankie

hi all, please i'd like to know if it is possible to shutdown a PABX remotely, if so how do i achieve this.Thanks guys for your help. phrankie.

Hi all, i need to install an NIU card on a BC 10 system but i need to know if i require a licence ,i also need to know if NIU/2 can be used in BC10. thanks

Hi all, i have two sites A and B. site A depends on site B for its Trunk calls.The trouble is that trunk calls from site A have number presentation but trunk calls from site B doesn't have any number presentation.this is curious because it is numbers resident in the exchange with the trunk...

hi guys, i need to configure a group hunt such that it overflows to another hunt group over a trunk, the trouble is the trunk has an access code, is it possible to include this in my configurations,if so how do i achieve this?. hunt group number in site A: 1234 hunt group number in site B:1234...

Hi guys, i have an equipment position in my system that is "system blocked", the trouble is the position is not equiped. i've tried to end the board position without success,manually unblocked it still no success,i even placed a board in the position so it can be unblocked yet it still tells me...

Guys, i've been having these alarms in my system for some time now cant seem to get rid of them. i've even tried a hard reset and they still keep showing up. pls i need help with this. thanks CLASS: 4 269 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION DATE TIME ALP NOIF UNIT EQU...