Search results for query: *

We have gone through setting up the teleworker phone which is a 5330 phone. When we get the phone off-site, it goes through its loading process and it actually comes up for a few seconds. Then it goes it "HTML download" and stays there. You can dial out, it rings the number calling, but...

I am setting up for the first time a Mitel with a PRI. I am having issues with analog phones not ringing like they should. They will ring once or twice and the ring volume goes way down. Any advise would be appreciated.

I have a mitel 5000, and having issues with loop start trunks not releasing. I work for local telco, and each line has COD. Any ideas?

I have gone through the process of adding new WLAN sets. The phones work fine, they can make and receive calls. The problem is when I add a second DN on the 6120, to match what the customer already has on their 1220/1230, it will ring but I cannot answer. I am also using SRG at the individual...

I have a CS1000 with a mixture of 1220s and 1230s. I have the message button (when pressed it goes directly to their voicemail box) on the 1220s working, but can't seem to get the button to work on the 1230s. Thanks for any help.

I want to be able to set the main number to be the number sent out from the pbx whenever someone dials out. I have 10 different locations,(on the same PBX tied together through a network) the customer wants to send the main number from each location no matter what ext/dn they are dialing from...

I am working with a school system that has 1st call email software. They want desktop messaging, is that possible. According to documentation its not, but our TAC group says it is. Any help would be appreciated. Thanks

Is there a device that I can connect to an IP phone that will allow en external ringer? We are replacing phones in a garage type environment that has existing analog phones that have an external ringer mounted on the outside/ inside garage area.

I have a CS1000E in our main office with an SRG attached at 10 different locatons. I am trying to get 911 to work. Do you have to point/build route table so when they dial 911 it goes thru the SRG? This is a IP phone installation, with 2 lines to each SRG. I know, in Normal Mode the phones...

I have a customer about 4 hrs away, we are adding an expansion with GATM8. The customer does not want to shut the system down, will I have to shut the system down or not? I don't think I will, but wanted to be sure.