Search results for query: *

thread690-1394628 From CBB's previous post: List trace station xxxx/x An example would be list trace station 1234/7. This would activate button 1 on extension 1234. Note: you have to add 6 to whatever button you want to press, button 1 is 7 button 24 is 30 etc… I'm running CS1000M Ver 3621 R7...

I have several TNs that I'm looking at that have an "H" after the TN. I do not know what this means. I've asked several co-workers; both with more experience than I and they are just as in the dark as I am. Is there some one out in Tek-Tips Land that can enlighten me? I have included two of the...

I have an 4507R with a port that does not need the residual commands left by previous admins. interface FastEthernet6/12 description HR Rm215 P639 switchport access vlan 10 switchport trunk native vlan 999 switchport mode access speed 100 duplex full qos trust dscp tx-queue 2...

I have a problem with configuring a vlan on a cisco 4506 switch. I've gone transparent created the vlan saved the ru to st; switched back to client, but still a self-assigned address. This switch is client, I've already created the vlan in the switch that is the vtp server. Keep in mind I'm new...

I have a Cisco 2950 and a Cisco 4506 and I cannot get the trunk between them to work. As I am new to this please do not hesitate to ask the simple questions! The config on the 2950 port: interface FastEthernet0/1 description Trunk to CoreSwitch switchport trunk encapsulation dot1q switchport...

I have a HP Procurve 2524 switch. I have tried to console in by Cisco rollover cable attached to a USB converter (I'm using a Mac). I cannot get Zterm to work. I've done the pointy object approach with the reset and clear buttons, but to no avail. Any and all suggestions would be appreciated...

I'm trying to get a DSL in one building shipped over my internal phone line (via 66 block) to another building. My pinout does not seem to be working. 1,2,3,&6 1= white/orange 2= orange 3= white/green 4= green I'm using 568b from the DSL modem to the 66 block with the pinout above, then the same...

I've got a cisco 2950 switch that I need to find out the IP address. The NA is no longer around and, as you can tell, I'm new to this. I would like to thank you in advance... BTW, I've already reset the psw so I can get into it. I just do not know the exact command to get the info. They mostly...

I have a port on a Cisco 2950 that I have not been able to bring it back to life. Any suggestions as to how I can fix this and something about how to keep it from happening again would be appreciated. Thank you in advance... They mostly come at night, mostly

I have a T1 I'm wanting to get rid of and replace it with a Metro Ethernet link. What I have is an Actelis ML628 Metro Ethernet device that is being fed with Fiber from the Telco; then the ME device, with copper, feeds a Cisco 3745 router. I cannot get these devices to communicate. I have a...

Before I begin let me say I am a neophyte. I'm learning as I go, so please do not think that there is an answer below my skill set! I have a Cisco 2950 that I am trying to assign an IP statically. The switch was working before it reverted back to its default settings. After this I need to set...

Hello All, I just installed Asterisk Now and cant seem to get the GUI running. Any advise would be greatly appreciated. They mostly come at night, mostly