Search results for query: *

ghtrout.com has been down for a couple of months, as noted here: http://www.tek-tips.com/viewthread.cfm?qid=1769054 We have been working to keep the actual ghtrout.com domain up but it's taking longer than expected for the transfer and such. I wanted to let the board at large who may not have...

I was notified this morning by our leadership at work that Gene Trouteaud, who many of you know here by GHTrout, passed away unexpectedly this morning. I have been lucky enough to have been working with Gene for the last several months but his work here as well as his own site has helped me out...

I have set up a TIE line between my CS1000M and a brooktrout fax card that belongs to a fax server. I have set up DSC's to allow certain extensions to be routed over that TIE line but I need for the fax server to be able to make use of the PSTN connections on my Nortel for outbound faxes. I'm...

About every 3 months or so I get a call from my operators telling me the "lights on the console lit up again" They are referring to the top 3 lights on the left which apparently correspond to some trunk groups we have that control different areas of paging. All these groups are on one Universal...

I have a new system that I've connected to our CS1000 with TIE trunk. We have had an autoattendant running with the ability to thru-dial any extension while the message is playing. I've recently started transitioning some of these numbers over to the new switch. Since they share the same DN...

I've done some searching for this and I'm beginning to get discouraged. I've tied my Nortel and Asterisk system together with QSIG tie trunks and I'm looking for a way to do what I can already do in Asterisk to get to extensions on Nortel, that is when you dial 4 digits it searches through the...

I've followed the pubs as best I can tell and when I go to the TLAN address of my signaling server to look at element manager I get a blank white screen. No errors, but just a blank white screen. I can ping from the signaling server the TLAN gateway, and my CS1000M, and callpilot (both on...

I'm having all sorts of trouble integrating my CS1000m with another PBX and I'm looking to verify my pinouts from the Dual PRI card. I'd like to know which pins on the DB15 to cross to make a crossover plug, also which pins should go to what on an RJ-45. What I've been trying is this: DB15...

Well I always try to read before I post but I guess I've been looking in the wrong places. I'm trying to change my ACD queue from a round robin type scheme for ringing the phones (only 5 of them) to a ring all scenario. I want all (idle) phones to ring when a call comes in and whoever picks...

Trying to get a TIE trunk working between my CS-1000M running succession 4.5 with NT5D12 Dual PRI cards and the NTBK51 dch daughtercards to talk and play nice with an Asterisk system. I've built the PRI on both sides using 5ESS, NI2 (did instead of TIE), ISGF, ISIG, etc etc and nothing seems to...

ERR5525, which according to the documentation means "Parsing of name information received." Anyone have an idea how to suppress this message? We are not getting names on our caller ID and from what I've read it's because the CO is sending it in the wrong format or perhaps because they are...

Hello all, I did a quick search and no one else seems to have asked this question yet. I have a new-to-me CS1000m-mg that a few nights ago I cutover to from my older Option 81c. On the 81 we have had a Spectralink system (the one that emulates a 2616, not the WLAN model) running for years...

I've been going through the first real ground up installation and commissioning of a Meridian 1 (outside the classroom) and I can't seem to get the TTY communicating with SDI paddleboard. I can hook up to each core and talk there and I've tried every combination I know to get tty0 or 1 running...

I'm running A CS1000M Succession 4.5 and I'm about to cutover an older Release 23 switch to this one. On that switch I have a group of 3 CAS T1 as IAO trunks and one CAS T1 as outgoing only. What I'm struggling with is since we didn't have DCH in our old switch, how do I assign multiple PRI to...

I bought a CS1000 rel 4.5 on the used market. This is my first time with an ethernet enabled Nortel switch and I haven't a clue how to get it set up or for that matter how I'm going to have 3 lans (TLAN, CLAN, ELAN) and only having one ethernet port on the back of each core... Is there VLAN...

I need to add a network group to my aging Option 81c that's running release 23. I have to do this in order to get enough IPE shelves to get rid of the SL-1 PE shelve's i'm currently running! In any case I've found a great NTP on adding a network group to an IGS system but it's for newer...