Search results for query: *

I have a New BCM 50 with 6.0 software I setup a hunt group with overflow to ext 221 This is set to option 1 in the ccr tree when you press option 1 the call rings on the hunt group then on the ext but do not go the the ext VM it goes back to the ccr menu recording this would be a nice feature...

Has anyone used SIP Trunks in a BCM 450 if so did they work out we use them with the allworx system and with a good router they have work as advertised. This is the first time that we have look at using them with the BCM and I would like some input before I price them to my customer. Thanks

I was installing a expansion on a BCM 50 and bumped the power cable it was not plugged in all the way and caused the system to restart now the system power up the bottom LED turns green the top stays orange the phone go though what looks like a normal start up but about the time the phone should...

I have a MICS that will not route call to target line from a inbound PRI DID It will however send the same DID out over a route on a site to site T1 to a MICS and back and they work fine This PRI is coming from a vega 400 SIP gateway and I have had problem keeping the T1 up with it set to NT...

I have a customer with and older BCM 50 with 2.9 we are having problem with intermittent modem tone when and inbound call is answer. I was told by the DT provider that it is the caller id being sent to the system. Another tech told me that there was a patch for this and that nortel has release...

Has anyone set up a vega 400 T1 gateway with a MICS I have It setup and running but It is streaming errors Timing slips from the nortel to the vega I have tried changing the T1 card and the clocking card this did not help. The Vega is set as the master clock and the nortel is set to secondary...

I have set up and old R1T1 for auto nigh and Lunch but when I Change the time to 11:58 it did not go into the service mode at 12:00 What am I missing