Search results for query: *

We want to implement the J179 phones as SIP end points. What do the scope strings look like when setting these phones up as SIP end points? This is our first time in doing this and we do not know what those scope strings would look like. I am assuming it would still be the option 242 DHCP...

Currently we use several WIndows server 2008 file servers for our phones to grab firmware and back themselves up to. Win 2008 is at end of support and I have been tasked to replace the 2008 servers with 2016 servers. I have tried changing the IP address of the 2016 server to the IP address of...

I have a need to have 2 backup paths for two standalone systems. Both share the same file server and backup path currently, but there are some duplicate extensions and when the phones restore they over write contacts. I am thinking there should be a way using the 46XX file to back up to two...

When I try to back up my announcements I get this failure notice: "Backup Announcement Failed: can not Retrieve IP Address for VAL source." The system was upgraded from 5.2.1 to 7.X about a month ago. At the same time the IP addresses of the media gateways were changed. This all worked fine...

I have a G450 that has run out of space for adding announcements. I want to use the compact flash drive from a retired S8730 and install it on the G450 for more space. Can I use the the compact flash drive? Do I need to format the compact flash before inserting it or can I insert it and format...

All, we have a few Win 2003 servers that I am being tasked to replace as they are at end of support with Windows. We used MV_IPTel for years on the servers to help the phones get their firmware. MV_IPTel does not run on Win 2008 or higher. For our 46XX phones we want to use the Linux box. I...

I have a situation where we cannot dial long distance numbers using the app. I get denial event 1186, invalid number format. I think this is related to the long distance code the app is trying to insert. We do not use LD codes for national dialing, so my issue is how do I get the app not to...

Hi we are being asked to move to Win 2008 servers for our file servers from Win 2003 servers where we used MY IPTEL MGR. I have been able to get 96XX and 96X1 phones to use the 2008 server but not the 46XX phones. All the 46XX phones come up with an http 404 error and when you look at the...

I have a hospital that currently has two G6560's with two clans that the phones register to. This particular hospital is an ESS off a much larger hospital. We are in the process of removing the G650's and replacing them with G450's. My problem is how to gracefully push the phones off the...

How do I view the USB to see what files are on it? I think it might be full and need to be reinitialized as well. how would I reinitialize the USB?

I have seen and have connected to a G700 using Site Administrator but cannot figure out how to get it to work on a G430 or G450 gateway. Any help would be appreciated.

IS it possible on an Avaya Aura system to have calls cover to one destination when busy and another destination on ring no answer? I came from the Rolm and Siemens world where you could send calls to two different locations based on busy or ring no answer

G700's will support MM716 24 port analog cards

I am trying to set up 1X mobile lite for our iphone users, as I understand it you use FNE codes and EC500. I have the station and cell phone set up in EC500, and the FNE codes are DID's, but when I dial the FNE codes I get "all circuits are busy" and fast busies internally. What am I missing...

I am looking to set up SNMP on our CMS servers for alarm notification, how is this done? I can not find anything on this

I am having a discussion with a co-worker on what exactly is needed in the scope strings. Below are the strings I want to use: Data MCIPADD=10.84.80.20,MCPORT=1719,L2QVLAN=14 Voice MCIPADD=10.84.80.20,MCPORT=1719,HTTPSRVR=10.240.5.149,HTTPPORT=80...

I am trying to upgrade the firmware in a mm716 and when I run the copy command it comes back and tells me "wrong state", what does this mean and how do I fix it so I can upgrade the firmware

Avaya has asked me to downgrade the firmware on my MM716 boards to FW 88. I have a G450 on CM 5.1 and cannot find any documentation on how to do this. Any ideas on where to get instructions on how to do downgrade/upgrade firmware?

I have an Avaya on CM 5.0 with G450 Gateways, when a large fax comes in, over 2 pages the call disconnects before the full document is recieved. They are on PRI DS1's