Search results for query: *

I forwarded an extension to a cell phone number. Where do you control if you want the call to end up in the cell phone's voicemail? CM5.2

I have an inbound analog line which is pointed to a Auto Attendant menu. Pressing * will take the call to voicemail. It is set to "normal transfer". However, I have one user who is cannot access voicemail using *. When she calls from her cell phone and press * it routes her call to the...

My PRI is down. I do have several analog lines. How can I program IP Office to use the analog lines for outbound traffic? Here is the set up, 1 PRI (down) 8 analog trunks Out going group ID is 2. Do I need to creat a new short code? IPO 3.2

I have a remote S8300 and need to find out its serial number. Any command in ASA that can provide me with the serial number of this remote S8300?

I have a user who needs a speed dial button to dial a toll free #. What is the best way to do this? Add a short code button? IP 406, v. 3.2 5410 phone

I have a remote 4610 connected through a VPN. The phone boots up correctly but at the extension scree is says "2011 -registering no signaling connection" I see the extension registering with the clan in ASA. Remote site is on a Cisco pix DSL line. CM 5.2 S8500

What is the ASA command to list all IP phones connected to the switch? CM 5.2 S8500

I have several remote sites, besides login into the web portal, is there a command in ASA that can tell you what type of server you have? I did a "list survivalbe-processor" but it doesn't tell me if it's a s8300 or other type of server.

Is there a command to see what is the usage on a CLAN board? It terms of capacity usage. S8500, CM5, thanks.

Is it possible to add a trunk access/select button on a phone? CM5 S8500

I have a remote IPO 406 ver. 3.2 with 8 analog incoming lines. Currently the IPO unit is using our central Intuity Audix LX for voicemail. I want to switch to embedded voicemail. Besides changing the "voicemail type" and instructing users to record new greetings. What else needs to be done...

caller select option 1 from menu and calls go to extension 4000 rings 4 times and then goes to an external DID number. I was thinking about creating one hunt group for ext. 4000 and add a VDN ext. as the 2nd ext. in that HG. The VDN will then go to another vector and route out to the external...

I need to change the extension set on a call pick up button but there is a "lock" icon on it. How do I "unlock" it? IP 406 vers.3.2

I initiated call fowarding for one extension to another and when the terminating ext. doesn't pick up, it doesn't go to voicemail. The way I enabled call fwding is by signing on the extension using IP Softphone (the ext. is remote) and then clicked on the call fwd button.

When your main incoming and outgoing trunks are full, what are some "back up" routing that can be done? I understand it all depends on your infrastructure but I'd would like some general practices being used. Running S8700 cm5 with 2 T1 for outgoing and incoming and several H.323 trunks to...

We want to integrate TTY calls for our S8700 CM5. Can it be done? Receive TTY calls to an extension.

When you press "0" in Audix LX it transfers to the operator. I would like to change the routing. Where in Audix can I change the configurations? CM5 Audix LX

For fail over situation, I have 3 trunks and in case my 2 main trunk fails, how do I send calls to my 3rd trunk? S8500 CM5

I need to enable call forwarding to another internal extension. Besides pushing the "call fwd" button is there another way to do this? Such as changing the ext. to a virtual ext. and then enable call forwarding in ASA. running CM 5

I'm looking for a device to plug in a wireless microphone into a 2410 digital phone. This is to provide a conference meeting solution where the 2410 would be used to dial into a conference bridge and the speaker can talk through a wireless microphone that is connected to the 2410.