Search results for query: *

I have senders sending from the domain ubu.bank being rejected. Sendmail log shows them being rejected for unknown top level domain. I have specifically allowed the tld in the access db. -- [root@mta1 mail]# grep bank access bank OK Still, it gets rejected...

Got a machine running postgres 9.1.2. I need to downgrade it to 9.0.5 to match a cluster. Problem is YUM (RPM) keeps claiming to be unable to import a key, even though the key is right there where it should be. The contents of /etc/pki/rpm-gpg/ -- drwxr-xr-x. 10 root root 4096 Oct 29 2011 ...

Helping out another organization with a server they have. It had 30G disks in a mirror on an LSI disc controller. We changed the disks one at a time so the mirror is now made of 146G disks, so it shows up in the bios as one 146G disk. The LVM in OS still insists on seeing the disk as 30G...

Running RHEL 6.1 named. Have it running in primary mode on one server, and slave mode on the other. The slave version gets the zones from the primary version, but it is not capable of creating the slave files. So it works, but I'm aware that if the secondary ever rebooted while the primary was...

I'm working on a system that I did not set up. The person who did set it up is not available. The mail system is running slower than normal. I get the following error when starting it -- Starting sendmail: WARNING: Xspammilter_to: local socket name /var/run/f1.sock missing If I go to...

We have an AS5400 that we are using to provide PRI's to customers. It has the following circuits coming into it from the Telco (AT&T).5 Trunking circuits that come across T1 ties into a t3 mux, and then are then delivered to a T3 port on the AS5400. ! trunking circuit that is connected into a T1...

Okay, so we are generating a PRI an an AS5400 media gateway and delivering it to an IAD2400 at the customer site. There are three channels on the PRI, which is reflected in the trunkgroup status. controller T1 1/0:19 framing esf channel-group 0 timeslots 1-15 speed 64 loopback network...

We recently changed the backbone connection for one office from a T1 to a bonded DSL line. In doing so, we moved the ACL from the T1 interface to the dialer1 config for the bonded DSL line. The ACL, which was only to block unwanted inbound traffic on the line, was now blocking damned near...

Okay, I've almost got this whole ppp multilink over pppoe thing worked out, but I'm dealing with one final mystery. Without ppp multilink in the virtual template, the link comes up as a normal ppp connection, as would be expected. interface Virtual-Template1 ip unnumbered FastEthernet1/0.2...

Problem: One one end is a cisco 7206. It has an ethernet connection to a Zhone Bitstorm DSlam. 3 DSL connections leave the DSlam. One goes to one comtrend modem. The other two go to another comtrend modem in a bonded pair, so they act like one DSL line. Both comtrends operate in bridging...

We are having on an AS5400. PPP works fine with version 12.2.16, but fails with version 12.3.13. The config is not changing between the two versions. With the old version of IOS everything proceeds as normally, as shown by the following debug output (debug ppp events, errors, and negotiation)...

I'm dealing with a strange problem that we've been having for some time. Cisco 7206 running IOS (tm) 7200 Software (C7200-IK9SU2-M), Version 12.3(23). Have a crossover ethernet connection to a linux box on fastethernet4/0. Have a backbone internet connection on ATM2/0.4. Have a crypto map...

I have a vpn link to another network. It's setup using crypto isakmp. The vpn comes up when traffic is directed to it... gw1.newalb#show crypto isakmp sa dst src state conn-id slot 24.235.29.17 65.119.118.136 QM_IDLE 1 0 but when I try to...