Search results for query: *

is it possible to learn bios version of an cppm cs card without booting card up ?

i am unable to turn MGC setting to factory default, when i connect to com port i see nothing , just unable register to primary callserve messages. Can you advise me on this ?

hi all, i have to load a database from floopy diskette to option 61c 4.5 system. can you tell me the procedure ?

I'd like you to confirm the expected contents of a CDR L record The call setup is : Extension A rings Extension B Extension B has Call Forward No Reply set to Call Pilot IVR The call is dealt with by IVR and the call clears In the CDR L Record we have the DN of Extension A and the Call Pilot...

ip phones S1 is SCS Node ip, IP phone is redirected properly through NRS NCS, but when the ip phone register first time Invalid ID (3) shows on the display, once any key presses the error replaced with User:DN which showes that the phone is redirected to the Pcs. if we leave the phone for some...

Is it possible to change the "Call Force Tone" on a CS1000E rel 5.50 (CPPM Call server)? LD 56 - ACFT prompt. It is possible to change this ACFT prompt on a CS1000M multi group rel 5.50 and on a CS1000E rel 6 (beta trial). If I try to change this on the CPPM rel 5.50 it is not possible. The...

Hi all, My system is rls 5.0 When phones forwarded to a private mobile network (4 digits) (of an external carrier) and when incoming call comes to one of them, the calling one does not receive any calling tone. This same thing is not happening while phones are forwarded to a mobile (9 digits...

Hi All, NTP for the upgrade from Meridian 81C CP4 FNF to CS1000M MG PIV FNF Rls 5.5 and i cannot find it I only can find the next NTPs but there are not my case. NN43021-469_02.02_81CCP4FUP.pdf Communication Server 1000M and Meridian 1 - 81C IGS to CS 1000M MG CP PII FNF Upgrade...

Kindly we need support to solve CLID issue on tie route with Cisco access server (ISGF DCHs ). The problem is when trying to initiate outbound call on route 59 from any set configured with scr key entry 18 the number on this entry which supposed to be received by Cisco is 414113999 , but this is...

i got the following error and the sig server reboots ,it is issp rls 4.5 what can u suggest ? [0016] 30/03/2009 09:21:10 LOG0002 OMM: Memory usage Level-2 (95%) Warning SET : Current Allocated 386568 Kbytes Max Available 406884 Kbytes [0017] 30/03/2009 09:21:10 LOG0001 HTTP: Memory usage...

The system is CS1000E with ip peer to another site itg trunk, on calls between the systems if the user on the CS1000E puts the call on hold and retrieves the call there is no audio from the cs1000E to the remote site, but is able to listen from the remote site. this info gets printed on the...

Hi all, Corporate directory and PDL lists stop working on IP sets and start working again after an hour without human intervension can you please advise ?

Distinctive ringing is not working on route 22 and 30 but it works in route 17. It looks like the configuration are same..Looking at customer's configuration, NDRG is set to yes and ATDNs are defined for incoming trunks. And these ATDNs are MCR keys for the sets we have. So when a call comes...

After reinstall of my alternate SPS i am not able to join it with the main SP i get the following error. What is the TLAN IP address of the Primary Security Service server? 10.150.51.50 You entered 10.150.51.50 as the IP address. Is this correct (yes/no)? yes Could not add host: Duplicate...

When i try to redirect an ip set to the main office the ip phone restarts and tries to register with the main office, after sometime it says server unreacable retrying in..... in the srg element manager under srg-s1000 tterminal i can the particular phone is in normal mode and has a motn and as...

hi all, i have a srg rls 1.5 the phones are redirected to the MO but the set seems idle and unregistered should s1 be the ip of MO and s2 the ip of srg on phone settings ?

On the Expansion modul all letters right-justified only if i change one key labling to a name with german characters is this key left-justified for example keylabling on expansen modul Mayer right-justified Huber right-justified Zieltaste...

Hi Can we use NTAK02 card with cppm systems? Where can I find documents about this ?

hi,after upgrade to rls 5 ,vns dch do not work on port 3 for NTAK02 card for cPPm system,customer also tested the problem for rls 5.5 cppm system result is same not able to enable port 3 but for system SSC rls 5.0 everything is OK,anyidea?

I just like to ask how is it to enable two consoles operating the same time in one system Meridien Option 11C. as you know, we had a client which is having two consoles configuration but when we connected both at the same time the other one became passive and only one of them is having an...