Search results for query: *

Does anyone know or has anyone tried to put a Avaya 4610 phone on a 4 or 6 port mini switch (net gear or Cisco). The platform is G450 S8300 software 6.2. Any help would be appreciated!

Good Morning, Can anyone recommend a good Avaya TTY phone? We are using a G450 with S8300 version 6.0. Thanks!

Good Morning all, Can anyone tell me why my imbedded Audix vm in my G450 6.3 gives me the message "Extension not valid" when we try to transfer a voicemail from one box to another? I checked as many of the threads as I could in the past 3 days but haven't found an answer, I also googled it and...

Good Morning, Does anyone have a number to reach the Shortel Emergency Services division? I have a 911 dispatch center that needs to talk with them but doesn't have a direct line. The number that they have is no longer working so they are asking for a good contact number. Thanks in advance for...

Ok here is a wierd problem if anyone has an idea I would greatly appreciate some help. I made an auto attendant and everything was working fine until a week ago, now the ATT wont transfer calls to subscribers it just says "please wait transfer can not be completed try again later" and then hangs...

Good Afternoon All, Has anyone tried the Plantronics MDA200 paired with the SSP 2714-01 to be a bridge between a phonak compilot 2 and a 4610sw set? We have a user that has hearing aides and a Phonak commpilot 2 and would like to connect to our Avaya 4610 ip phones using his device via...

Good Morning All, I am having trouble remembering how to fix this small issue. I just added 12 newnumbers to my G450/S8300 cmm 6.3 and the extensions in the 01xx group are having an issue with Audix asking for extension and password when the call is forwarded to vm. A call comes in and if it...

Help please! We just put in a replacement Audix because our last one had a hard drive fail and now only part of the messgsge lights will work. The lights on the phones that are located on switch #1 (that is in the same building as the Audix) work fine. The lights for the DCS switches don't...

[ponder]Please help, I have been looking everywhere for an answer to this problem. All I'm trying to do is make the outgoing caller id work on one switch on my network. I have a G450/S8300 with CM6.3 that is tied to a G3RV9 by a point to point T1. The caller id is being sent from the G450 (Ican...

Can anyone tell me if it is possible to have calls transfer between two different audix systems using auto attendant? I have one Intuity audix connected to a G3RV9 using auto attend and one G450 with a S8300 imbeded audix VM and I need any calls that come in over the old intuity auto attnd to...

Can anyone tell me how to assign an ip adress to a c-lan board? I have checked all the books and research material but still can't get it working. Does the prologix v8 even support ip traffic? I got it to work on a g3v9i but the 8 is driving me nuts, please help?

Would anyone happen to know if I can have different ring tones for different calls? Example= I have a Avaya Lucent G3V6 that has two personal call out lines, the users at that location want all the calls coming in on those lines to have a different ring tone than the main system calls. I have...

Hi All, We currently have 30 incoming and 23 outgoing analog trunks that we will be converting to 2 T-1 PRI's for caller id. My question is with a existing T-1 PRI used for 911 ali info. I'm told it sends the location info over the PSTN to the PSAP if someone dialed 911 from a system number...

Is there a way to have a one button dial from the directory lookup softkey? Right now my users have to look up the number exit out of the softkey menu and then dial the 4 dig ext. Thanks

After finally getting the ok to switch from analog DID trunks to a PRI T-1 I find I have a few questions that my vendor doesn't have answers for. We currently have a 911 t-1 to give out ani/ali info I asume and I am wondering once we cut to the PRI can I get rid of the 911 t-1? Our main switch...