Search results for query: *

I have a BCM 400 with several sites connected that work fine over the Public Interface. I am looking at setting up some home users through VPN (Sonicwall), however when the phones connect there is one way audio. I make make a call and my voice is heard, but I cannot hear the other party. Im...

Hi I have a spreadsheet with two date colums. Column H is formated in MM/DD/YYYY. Column B Is formated the same. This data is exported from a DB in this format. I need Column B to be in YYYYMM Format, it shows us year and period. I need a formula that will take this info from column H and...

I have a MICS 4.1 with PRI attached to Startalk Flash VM. If I specify Pool 1 as the outdial for message notification it will not outdial. If I specify a line it will outdial for about a week then quit until a different line number is specified. There are no analog lines attached to the system...

I HAVE A MICS WITH 4.1XC ATTACHED IS A NAM 4.0.04. I NEED TO USE PORTS 13 AND 14 TO ADD TWO MORE 0X16s. I AM TOLD THE 7.1XC SOFTWARE WILL ENABLE THEM, BUT THEN MY NAM WILL NEED TO BE REPLACED. DOES THE 7.0XC ALSO SUPPORT PORTS 13 AND 14 ON THE EXPANSION, AND AM I CORRECT THAT THE 4.0 NAM IS...

I CURRENTLY HAVE A MICS WITH 4.1XC SOFTWARE GETTING READY TO UPGRADE TO 7.1XC. I WANT TO MAKE SURE THE NAM IS RUNNING 4.1 AND NOT 4.0.

I HAVE A MICS WITH 2 PRI, 2 6 PORT FIBER EXPANSION, 9 0X16 MODULES, AND 1 ANALOG STATION MODULE. I RECENTLY ATTACHED 2 MORE 0X16S TO THE PORTS 13 AND 14 OF THE EXPANSION CARD. THE PROBLEM IS THAT THE MODULES DONT SEEM TO INITIALIZE, IF A HANDSET IS ATTACHED IT JUST FLASHES BUT IT NEVER COMES UP...

I HAVE A 0X32 WITH DIDs SETUP FOR EACH EXTENSION. DURING NORMAL RINGING MODE THE DIDs RING CORRECT INTO THE PROGRAMMED EXTENSION. HOWEVER IN NIGHT RINGING ALL DIDs ARE PICKED UP BY THE AUTO ATTENDANT INSTEAD OF RINGING AT THE PROGRAMMED EXTENSION. ANY SUGGESTIONS?

I HAVE AN OLDER MICS RUNNING 4.1 I BELIEVE. WE ARE TRYING TO ADD A SECOND PRI TO THE SYSTEM BUT THE CARD JUST FLASHES LIKE IT IS NOT SYNCING I SWAPPED THE CARDS THINKING ONE MIGHT HAVE BEEN BAD..BUT IT WORKS. I HAVE ALREADY TURNED UP THE SERVICE SO I KNOW IT IS NOT A CROSS CONNECT OR PROVIDER...

I HAVE AN 8 PORT FAX SERVER CONNECTED TO A 0X8 ANALOG MODULE. IS THERE A WAY TO PASS DTMF TO THE ANALOG PORTS FOR INBOUND ROUTING

DOES ANYONE KNOW THE MAXIMUM AMOUNT OF DIGITAL STATIONS FOR A MICS 4.1

I have a customer that wants to install an old 8x24 DR5 from storage. When I hook it up it works fine but will not detect the 0x16 attached to it. It has the 2 port copper expansion module and a 12x0 line module. I've tried reversing the ports on the expansion module. Tried swapping the...

I HAVE A 0X32 6.1 MICS. I WANT TO SETUP LINE REDIRECTION FROM ONE OF OUR DIDS TO AN EXTERNAL CELL PHONE OUT OF STATE. I PROGRAM THE TARGET LINE TO APPEAR ONLY ON A PARTICULAR SET USE F84, INTERCOM (9) 1 AREA CODE AND NUMBER CHOOSE THE LINE APPEARANCE BUTTON TO SETUP REDIRECTION. IF I PROGRAM MY...

HELLO IM TRYING TO CONNECT REMOTELY TO A MERIDIAN 1 11C. MY MODEM IS CONNECTED TO TTY1. I DIAL AND THE MODEM CONNECTS BUT NO LOGI PROMPT. IVE BEEN TOLD THAT IT IS POSSIBLE TO SETUP A PASSWORD THAT NEEDS TO BE INPUT BLIND ONCE CONNECTED. IF TRUE HOW DO I CHANGE IT. I HAVE FULL ACCESS TO THE...

HELLO, I AM NEW TO MERIDIAN PROGRAMMING. I JUST INHERITED A SYSTEM AND HAVE SOME USERS THAT WOULD LIKE TO CHANGE THEIR EXTENSION NUMBER BUT KEEP THE SAME DID. I CAN CHANGE THE EXTENSION BUT I DON'T KNOW HOW TO ROUTE THE DID TO THE NEW DN. THANKS IN ADVANCE.