Search results for query: *

Hello all, It's been a moment since I've done a CS1000 lab - but we have an Option 11c SSC card (NTDK20JA) we'd like to use in an extra chassis we had around. We had a few extra NT1P70AA chassis around that were used for off-premise T1 remotes. We're wanting to use this lab to setup and clean...

Hello all, I’ve come across an AT&T Merlin Display (7318H) console phone. It is in very great shape, but did not come with a power supply. I have a Merlin Legend system I’d like to try and use it with but need an external PSU to drive the phone. There’s a 5-pin DIN connector on the bottom of...

I came across a Meridian M5317TDX ISDN phone recently that used to be used with an SL-1 or DMS-100 system quite some time ago. I have a Cisco ISDN router with the proper card in my lab, so I plugged it in and was able to figure out getting it to make calls in and out. Apparently, there is a...

Hello, I have a Nortel BCM50 that was migrated from the BCM400. We have a DSM32+ expansion module in it that we moved from the BCM400 and I cannot get the last 16 ports to go to Enabled. I can only get the first 16 to enable. We had ATA adapters on the last ports and I have even tried to put an...

Hi all: I'm attempting to setup two-way calling between a Nortel BCM 3.7 and a Cisco CME (running on a Cisco 2811 router) via a back-to-back T1 PRI. I have the Cisco router setup as emulating the network side of the connection. I am able to call from the BCM -> CME, but when I attempt to call...

Hi all: I would like to explore the possibility of connecting a BCM400 3.7 to a Cisco Call Manager Express 2621XM router via T1 cross-over so that I can call between the systems. Currently, my BCM does not have a T1 card in it, so I would have to buy one. My 2621XM has one. Question is, do I...

I have a question of "will this work?". I've worked on BCM before, but have never tried what I am considering doing. I currently have an M8x24DS DR5 with several M7208, M7310, T7316, M7324, etc. phones. Also on this system are two ATA's and one ATA2 for modem, bell ringer, and alarm system...

Question. I have an old Partner Plus 4.0 system sitting around, and I'd like to use a PC to program it if possible. It is just an 8x24 system. I don't have any phones for it, otherwise I'd hook up one and use the menu. But my question is, does anyone know of a PC program to administer these...

On a CallPilot 100/150 with phones that have softkeys, when accessing the CallPilot interface, typically there is a 5 second delay until the voice prompts play. I think I know what the answer to this will be, but wanted to get some input from the community. Is there a way to change/eliminate...

It's been a good day since I've programmed a Norstar via ICS Remote Tools, and for the life of me, I cannot remember in the workbook under User Preferences 1/2/3 for Programming Buttons where keys count up from on the phones. I know that the Option 11/CS 1000 always had key 0 on the lower right...

Does anyone know if there was a way that you can expand a Norstar over a VPN tunnel? Although I don't have anything to do with it now, I had a customer at my previous work who had a Norstar initially. They moved over to a BCM50 in late 2008 and are now expanding exponentially and are facing...

Greetings Have a client that we are looking at getting Polycom Soundstation2 Speakerphones that work on a standard digital Nortel port. What's the general feedback that you get from clients looking at getting them? How easy are they to setup on the BCM? Thanks John Panzer John Panzer

Greetings- I came across a Tel-Control Ring Leader Call Director box recently. I was wondering if anyone has any idea how to program this thing or where to find a manual for it. I just have the unit and the transformer. It has 4 jumpers on the back for settings, i'm presuming. Thanks John Panzer

Greetings- I have a StarTalk 330 with the original Quantum 80MB hard drive. I have duplicated this hard drive to 2 other hard drives, an old Quantum ProDrive and an HP C2247 hard drive. Both drives are 1GB, but my hard drive copier just copied it as an 80MB partition. I tried to put in the...

http://www.reuters.com/article/technology-media-telco-SP/idUSN2232212220090723 Also, check out the buzz on the Meridian forum as well... John Panzer

Hey I needed to see if anyone possibly has the software for a Startalk 330, software version was 2.0.3. I powered up my unit, to get it ready to put in here at the house, and the hard drive is dead. I think I still have some old floppies and hardware around to load the software on a new drive...

Hello all- I recently acquired a used StarTalk 330 with s/w level 2.0.3. I will be using this at my house with an 824 DR5. Mainly using it for voicemail and night answering to route calls at night to a few extensions via menu choices. It is arriving tomorrow. What would be the procedure to...

Hello I have two Nortel ATA's for my system. NOT ATA2's or e-ATAs - just the original plain ole' ATA's (first ones). Does anyone have a manual for them? thanks. John Panzer

Hello- I have an 8x24 system, DR5 here at my house. I bought two more ATA adapters for the system to work with a faxmodem for sending faxes out and for some other phone/modem testing. These are the older ones that had the cords directly attached to them and have the phone plugs on the bottom. I...

Question: I was looking around for some ATA's and I've found some, but they have no power adapters. I know they use standard DIN cables with a 24VAC adapter. I can get some DIN cables and I have plenty of generic 24VAC adapters. Question is, what is the pinout for power? Thanks John Panzer