Hi,
I've a problem with the attenuation/amplification signals of analog extensions.
FIRST i changed the trm for an extension 2000(excac :dir=2000, trm=1;).
THEN i made some changes on trm matrix (sacos: unit=SACOS:UNIT=SCP, LIM=4,SECTOR=REL, ADDR=51&59,DATA=12;) i choose lim=4 because the...
hi,
is there any posibilty to make a same central authorization code wich can be used from all extension to lock/unlock all extension?
if the answer is yes, then how todo it?
NB: we have an mxone tsw system
i've tried to configure cil over ethernet in MXONE (NIU2)but
it dosn't work. please show me the mistake where it is.
I've done:
ioeqi:iodev=cil2,equ=1-2-10-4,type=network,usage=out;
ionci:iodev=cil2,rport=7000,ip=10.12.8.110;
cldfi:file=taxlan,iodev=cil2,user=cil-2...
hi every body!
in our company we have md110 bc9, we have some analog external line to PSTN "TL11", I've tried to size 2 external lines, call 2 pstn subscribers and when i made a transfer (external to external) it didn't work!! my directory number has a traf=03151515, in the adc the digit D7=3...
Hi all!
soon we will get a mxone! and i want to create a digital link with pstn using SS7 signalling! so what kind of board we have to use, i mean bords to convey speech channels and boards to convey signaling messages(signalling terminals)?
Muchas gracias!
hi every body!
in our company we need to interconnect our MD110 bc9 to the PSTN over digital line "E1" using a CAS signaling, we use a TLU20 card but what TL signaling we must choose? TL30 or TL37?? please also tell me the difference between them!
Muchas Gracias!
hi every one!
i know that the GJUL4 card has 2 shannels and every channel has 2 ports 75ohm and 120ohm, in our company every lim is connected to thg GS by GJUL4-GJUG4 connection using 75ohm! but we have a remote lim and we need to connect it over sdh line equipement that why we need to use it in...
Hi all!
we have 2 md110 bc9 networked by digital line E1 (ISDN), en each system the automatic call back is initiated by pressing the suffix 6,
now i want to initiate network call back when A party from system 1 find the B party (called party) is busy or no answer.
here parameter configuration...
Hi all!
we have 2 md110 bc3 and bc9 networked by digital line E1, en each system the automatic call back is initiated by pressing the suffix 6,
now i want to initiate network call back when A party from system 1 find the B party (called party) is busy.
here parameter configuration of the route...
Hi all!
I found in ALEX that's possible to make intrusion and forced the extenal line to be disconected
we have just to dial:
Dial *44*individual external line number# and external destination code (busy tone).
an press 4.. But after pressing 4 i always hear the busy tone
In my case The externa...
Hi all!
In Alex i found that to intrude and disconect a busy external line we have to dial
1)*44*individual external line number# and external destination code
2)dial 4.
but what does it mean the "individual external line number"??
please give me an example!!
Thank you for all!
Hi all!
In our system"MD110 BC9" users used the "call back" feature when they found they found external lines busy they did 6#. But now 6# doesn't work. and I don't know where is exactly the problem. please help me to resolve it!
Thanks for all!!
Hi all!
I want to know if there is posibility to make a anolgue trunk under supervision!! to know wich extension are using this trunk at the moment or on past moment.
thanks for all!
this forum is the best!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.