Search results for query: *

On a Cisco SIP telephone, when I am on a call, if a second call comes in, the phone doesn't ring. It makes a call waiting tone and displays the call on the phone display. Is there a way to make the second call generate a ringing sound in addition to or instead of the call waiting tone? If so...

I have a IP500v2 system with 9.1.12.0.213 firmware. I have connected a BM12 to a 9508 telephone instrument. Any button I program on the BM12, also appears on the 9508 telephone on what I would call the fourth screen. So if I program a line appearance on the BM12, it also appears on the 9508...

With the NEC SL2100, if I use a WAN dynamic ip address in the Router I periodically lose offsite IP telephones connectivity. I have started to use DDNS addresses in the router and IP telephones. That corrects most of the problems. The only problem left is the ip address in 10-12-07. It will only...

NEC SL2100 External Paging. This system is new with default programming - Every time I try to use the external page, I get a busy signal. It happens with the three paging groups (703-1,703-2,703-3)and the All Page. The internal paging groups work. Is there some programming to make the external...

NEC SL2100 - When I press the speaker button I get a double tone. I can't tell what is causing it. There are no missed calls or voicemail messages that haven't been listened too.

NEC SL2100 I tried to login with WebPro and it said the 'The login limit has been reached'. Is there somewhere to adjust the limit.

NEC SL2100 Individual Trunk Access Code: I see that 11-09-02 appears to be a programming location to put in a code to access trunks individually. For the sake of argument, if I made this '8', would 81 be for trunk 1 and 82 be for trunk 2?

NEC SL2100 Multi Button Telephone - When I go off hook, can I program the system to automatically pick a line button instead of the intercom.

NEC SL2100 Analog trunk doesn't disconnect after the automated attendant answers, and the incoming caller disconnects/abandons the call. The trunk also doesn't disconnect after the incoming caller is transferred to a voice mailbox and leaves a message and hangs up.

When one extension calls another extension, the voice mailbox doesn't pickup. The voice mailbox does pickup if an incoming call is transferred from the automated attendant to the extension. Thanks.

I am new to the NEC SL2100 - How do you make analog trunks point to the automated attendant?

I have an IPO 500v2 with 9.1.8.0 build 172. When two inside users are conferenced with one analog trunk (the trunk is a line appearance button), and one of the inside users disconnects from the conference call leaving one trunk and one inside user, the inside user continues to show that there...

Can a second message waiting light be programmed on a button for a different extension. Thanks.

I have upgraded two systems from 9.1.5.0.145 to 9.1.6.0.153 and both systems crashed. They didn't crash and reset; the power had to be physically removed and turned back on. It happened 3 times on one system and twice on the second system. (It takes a few days to happen) I downgraded them both...

I have an orange flashing light on a digital station 8 base card in an IPO 500v2. The orange light is flashing every 5 seconds. The card works correctly. I thought it should be flashing red. Is orange ok? Thanks.

Is there a way to see/retrieve voicemail message wav files on the memory card for the embedded voicemail system?

I have just installed release 9.1.600.153 (What I believe to be the latest version). My IPO 500v2 went down once and had to be manually restarted. One time doesn't make a trend, but has anybody installed this release and experienced the same problem?

Do you know if the intercom buttons can be moved. Thanks.

I have a IPO 500v2 in basic mode with 9.1.400.137 software. On my 9508 telephones there is an admin button on ext's 10 & 11. Is there a way to password protect that button? I have put a 4 digit password in System Setup/System Password, but it doesn't seem to have an effect. Thanks.

This is the first time I am setting up an IPO in Key System Mode. Can I setup the IPO in Key System Mode with an Essential license? Is there any reason to? Thanks.