Search results for query: *

I am having issues getting a Cisco 8831 setup. I have the "Cisco" display on the phone without any buttons. There should be an "app" button it doesn't get that far. There has to be something with a config file maybe? The phone auto-registers, but nothing happens on the display. I also see...

We are experiencing a constant humming sound coming from the over head paging speakers. We are using FXO ports on our Cisco Callmanager 9.x and paging does work when the paging number is dialed. Why would we hear a constant hum

I need to block my internal caller ID so when I can another phone in-house it will restrict my extension but display my name. Here is what I have. Partition - Nate_PT Translation Pattern Translation Pattern: 3104 Partition: Nate_PT CSS: What do I need in here? I then have Calling Line ID...

I am trying to setup Jabber Windows Client 10.6. We do not have Presence, but it looks like I can use our 9.x call manager with the Jabber to get it working. I am at the point where I am trying to log into the Jabber and it is looking for a username@domain.com. Do I need to use LDAP...

I want to be able to forward my phone based on where a call is coming from (internal/external). I know I can change the Forward but then it will ring my phone. I want to say if the call is internal go to this 10 digit number, but if it coming externally come to my phone. Using a 9.x Cisco...

I have a 866 toll free number that gives me a fast busy signal in one subnet. I can come back here to my phone and the number works in my subnet. We are all part of 1 network just broken down into different subnets. I can also dial other 866 toll free numbers in the area in question so I know...

Is there a way to make the Aastra 8004s flash as well as ring when called. I have CUCM 9.x

Trying to implement a directory via a phone service. I have one created and it works. It has 32 entries and if I try to put in another entry it gives me a parse error so I thought that the xml file is at its max for my phone (6961). So I just copied the xml file to edit a new one, created the...

My SIP trunk connects 2 buildings that would be LD if calling between the 2. We want the SIP trunk to avoid toll for calling other numbers that are considered local to each location. Right now, I have it working for DIDs that I own so if the far end would dial 91814788xxxx it comes through the...

I have a SIP trunk built and the other building has their SIP trunk and we are able to call using the SIP trunk. I have a route pattern that strips all but the last 4 digits to ring the extension. This works every other time. When it doesn't work there is about an 8 second delay and then a...

Trying to have no toll dialing between 2 LD buildings. The other building is going to be sending me 123-456-7890 over the SIP trunk, once it gets here I need to strip the 123-456 and just pass the 7890 to the extension 7890 so it rings the phone. Where do I set the stripping of the incoming...

Having issues when dialing into our dictation system from an outside line. I can dial our 4-digit dictation line from our Cisco phones and I am able to log into our dictation. It is when I dial the whole number from my cell phone or just from an outside line. Once the dictation system answers...

I am running a Cisco Callmaanger 9.1 and I have my external caller mask set to say our main number for 911 and for caller ID to patients homes. Now when I dial my cell from my desk phone it works the way it should, but when I dial 911 it comes up 814-911-0911 instead. Thoughts?

Where can I change where Call Park goes after the time has been reached? I want it to go back to the person who put the person in the park status.

I have a weird request. We went from a Nortel CS1K to a Cisco Call Manager and one of the biggest changes that users noticed was that when you dial a number you hear the tones back in your ear. Is there any way to turn off that?

I am trying to program a DID on a already existed phone and I get the error "Function not allowed on private CO line." when trying to program. First, what does that error mean and can this be changed so I can use the 8855 did? Thanks

Below are 2 phones that I need to do the following: If 8844 is busy it needs to rollover to 8845 ring there the default and then go to voicemail. Right now, if 8844 is busy it rings 8845 the default and then rolls to itself again rings the default and then voicemail. I know I need the SFA but...

I have an extension 8170 that works fine internally but when I dial 788-8170 I get a fast busy. I outted all phones with 8170 and dialed 788-8170 again which should go to a TELCO message but again I get a fast busy. I have other 817x extensions and they all can be reached by dialing 788-817x...

Ok...Here is my problem. I have 2 locations one running CS1K and an Opt 61c connected through a signaling server for 4 digit dialing. I also have a PRI Gateway that is physically connected to the CS1K for our VoIP offices. Here is the routing information at the main location ld 21 REQ: prt...

Ok, here is my situation. I have my Option 11c directly connected to a buffer box and then the buffer box connected to the server with the CDR software. Everything works except for capturing the DNIS. I have numbers ported to our PRI that I have IDC to a extension. Those numbers are mostly...