Search results for query: *

Hi, I have been asked the following questions off one of my server engineers we have 2 sites connected via a IPsec VPN over 2 ASA's Site A - 10.0.0.0 subnet which hosts all the internal server inc the SMTP which is on 10.0.0.11 Site B - 192.168.25.0 - no servers here I have been asked...

I'm currently studying for my CCNA Securtiy 640-554 IINS exam. I want to be able to play with cisco configuration professional software and use policy maps and police traffic. Can anyone advise a cheap model of router that can do this? I have some old Cisco 837's however they don't support some...

I have a Cisco 5505 firewall and have a single Cisco access point plugged into the POE port 7. On my wireless AP ( AP1142N ) I have 2 ssid's one for production vlan 1 and vlan 10 for my guest's. I want vlan 10 only to have access to the internet and nothing else, so they cannot access vlan 1...

2 ISP's 2 gateways Static Route Tracking example R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2 R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10 if the 2.2.2.2 network goes down it will use 3.3.3.3 however when as ISP goes down the gateway usually stays up so can i can track the link of the...

Hi Guys, I'm currently studying for my CCNP - Switching I was looking to setup HRSP in packet tracer however it doesn't seem to have the correct commands withing 3560 multilayer switch! I would like to purchase some equipment off the internet, which type of layer 3 switches would work at a...

the network 172.25.0.0 has been devided into 8 equal subnets. Which of the following ip addresses can be assigned to in the third subnet if the ip- subnet zero is configured on the router? Possible Answers A= 172.25.78.243 B=172.98.16 C=172.25.72.0 D=172.25.94.255 E=172.25.96.17...

The Ethernet networks connected to router R1 in the graphic have been summarized for router R2 as 192.1.144.0/20. Which of the following packet destination addresses will R2 forward to R1, according to this summary? (Choose two.) A. 192.1.159.2 B. 192.1.160.11 C. 192.1.138.41 D...

we have just implemented a cisco asa 5510 onto an existing network which runs along side a Fortigate they are not connected in any way. I need to get both networks talkig to each other, i'm struggling to think of the best way to do this. see network below Network A...

Hi Guys, Hope you can point me in the right direction on this. I'm on a network of 10.0.0.254 ( this is a cisco asa with IPSEC VPN ) and i'm trying to ping the local interface of the end point cisco ASA which is on 10.200.0.254. A server in the same subnet 10.200.0.24 can ping 10.20.0.254 OK...

Hey Guys, Hope you can help :) I have a site to site VPN setup (IPSEC) which seems to be all working well between 2 ASA'S. A site in Manchester and London. I want to ensure that the Manchester ASA is not sending all internet traffic to London and back again and just uses it locally. What type...

Hey Guys, Can the Cisco 3508G support dot1.q vlans over 1000 as i'm having issues get it working. If so please advise on the commands i need to use.

local subnet 192.168.1.0/24 local subnet 192.168.2.0/24 The GRE tunnel should reside on 192.168.3.0/24 and the relevant routing between the routers. This should allow a user on the 192.168.1.0 subnet to ping someone on the 192.168.2.0 subnet, via the DSL line. Thus creating a primitive VPN...

please can someone explain 2 me the following command iproute 0.0.0.0 0.0.0.0 dialer0 does this command have 2 be used on all series router as someone has told me this is what routes traffic to the net but i dont understand why we use zero's?? Hope someone can explain? Thanks

Guys i live in the uk just takin my 4 modules on the CCNA will be taking the exam in the next few months, what is the best way to prepare i have been doing test exams n stuff,Can you please advise of any websites that provide questions and anwsers, and topics are most likely to spring up? Hope...

Hey jsut wondering does any1 know were i can study cisco 1 to 1 with the tutor, only because when in classes i tend to find it hard to understand were as if your 1 to 1 you can ask as many questions as you like, an can pick stuff up allot quicker, I live in UK Manchester, Please Advise If Possible

Hi I'nm configuring a cisco 107 router dsl with the following interfaces ethernet 0 atm.0 atm.1 dialer 0 I have made the inside NAT the ethernet interface and now wondering what interface should i sign to the outisde NAT. PLease can someone assist it this all makes sense Thank You!!

Hi, i have configured a 3750 switch with an ip address n vlans. I have uplinked in 2 antoher switch using a crossover cable which works great, can access the network OK. However when uplinking ususing a Gbic module i have issues gettin on the network,gibc port lights show green,tired changing...