Search results for query: *

I'm not very familar with Avaya phone systems but an Avaya tech is telling me that my firewall is filtering the traffic thus the SCN is showing down in the system status. This is a site to site VPN. The system status on one end shows that the remote end is DOWN. There is no filtering in place...

I have a problem but can't figure it out. Calls going outbound are not working. I get a fast busy and the following debug: *Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpAssociateIncomingPeerCore: Calling Number=3615555555, Called Number=919567777777, Voice-Interface=0x0, Timeout=TRUE...

http://pastebin.com/TvHQwuk2 There is my config. I'm trying to configure this gateway so that only calls coming from extension 1258 will use dial-peers 500 and 501. Calls from any other extension will use dial-peer 100-103. Right now, it seems like it doesn't matter that the calling number...

I'm working on my CCVP and trying to think of way to simulate a PRI. I want experience configuring PRI at the port and in cucm so i can try building an environment from the ground up. Does anyone have any suggestions on how to get this working?

I have a problem. This is a test server and I'm trying to figure out why my messages are not being sent out. I can receive messages great. its fast and quick but when i try to send messages out, i get errors. I'm running GW8.0. I found this through novell...

We always have to use the BAT to change the default max numbers of calls and busy trigger. We also always change the "Hold Reversion Ring Duration" timer. Where can I change what the default value is for new lines?

I'm running CUCM "6.1.2.1000-13" and I'm trying to allow a user (or multiple) access to service subscriber page on the ccmuser page. It doesn't give me the option. I've made a role and gave read an update to the following permissions. I also associated the user to a group with that role in it...

I'm having problems with a user trying to calculate checks. We are getting ready to move to GP10 and using the Payroll Clerk Role, when they go to calculate checks, the receive an error saying they do not have permission to view a window. This leaves the check stuck processing and I have to...

I'm trying to figure out these permissions in GP. I have someone calculating checks. They can build the checks great but once they go to calculate checks, they get a permissions error after clicking ok. The batch gets stuck andthen I have to clear it. I can calculate fine using sa but not as...

I'm new to citrix and im trying to figure out what i need to do to update PS. I see there is one hotfix installed and its on sp 2005.04. Is this the most current? I can't figure out citrix's site and can't find anything on their KB.

I want to implement NLB with 4 IIS servers. The problem I'm having is what happens when the NLB fails? Is there something I can setup that will switch over to a different cluster if the first one fails or does this have to be hard coded into the application?

Any have experience with this? I'm having problems deploying to a handheld. I create the package and advertisement. The device sees it as it is listed in DevMgmt Scheduler Console. But its listed as Pending and never installs. In device management in the system tab of settings, there are no...

I'm having problems creating dynamic distributions lists. Once I create the list, it does not show up in GAL in Outlook 2007 or 2003. The AD shows the object but it looks like an unknown file type. Is this ok? What's more important, how do I get it to show up in the address list?

I have a WLC on a 9 Subnet using address 192.168.9.13. I have a LWAPP on a 85 subnet using the address 192.168.85.241. I can't get them to asociate with each other! What do I need to do to get these to work? Do I need to create another interface? LWAPP's on the 9 subnet work and associate...

For descriptive purposes, lets assme I have 3 sites. Each site uses different subnets, say, 192.168.1.x, 192.168.2.x, 192.168.3.x. Each site has 5 access points and all sites share the same SSID. Is is possible to setup the controller to give out IP's based on where the client is trying to...

If i got a PCI card with an RP-SMA connector, and purchased a N-type to RP-SMA convertor, could I use an antenna, say a cisco one or ANY antenna in general. Like the ones designed for AP use?

We are in the process of switching carriers for our locations. One location is coming online soon but our switchover is not done yet. We are going to have them install a consumer grade isp at the location which will have a static address. This store will use the 192.168.32.x subnet. How hard...

We currently have a 4 switch stack of 3750's. We want to order two more 3750's. I think it would be a better idea to make two stacks of 3 each. What kind of connection options are available to interconnect the stacks? I know there is 16gbps between the switches but what about between the...

I need to adjust the .NET security on a computer. How can I automate the steps on the following: http://support.microsoft.com/kb/815148/ I would imagine it would be only a registry edit. Anyone know where they are?

I'm trying to get an aironet 1231 configure with two vlans. They are working right now but I can't get to the web interface to configure the access point. The IP address of the accesspoint should be 192.168.85.6. Vlan 99 is 10.99.3.x subnet. Vlan 2 is 192.168.99.x subnet. When i turn off...