Search results for query: *

Hi, I have 50 x Cisco 7925g Phone Dect to testing... which are the basic hardware parts to testing them? I mean Access Point, Pbx etc... Thanks Alessio

Hi, I have 2 Dect 612d... they stay in "Rescue Mode"...with display in mirroring I already made "Master Reset" but nothing... How can I fix it? Thanks Alessio

Hi, I have a Siemens Hipath 2000 Pbx and many Optipoint Ip Phone I configured same parameters on the same phones... But work only the phones with Version R.5.6.0, the others phones with Version for example R.5.1.32 or less send me this error "Gateway Not Found" (parameters are correct!) They...

Hi, I have a Nec DT700 Phone... and I must configure my phone... After starting... Configuration...OK Then it ask user: ADMIN but password: 6633222 don't work (maybe someone has changed it) Is there a way to make a Factory Reset of phone? Thanks

Hi, I'm working on an Avaya Ip Office 500 V2 The release of software on the PBX is 9.1 Software Manager is V10 I'm testing an ATM4V2 Card (6 Digital Phones + 2 Analogue Phones and Daughter Card with 4 Analogue Trunk) This card works corretcly, but only as Standalone Card in Avaya Ip Office...

Hi, I need to know if possible in this Avaya Phone List... Which are Phones Sip Protocol compatible? I tried it with Asterisk VOIP PBX with success the 4610 and 5610 phones... others... 4601 4602D 4602SW 4606 4612 4624 4610SW OK Tested 4620SW 4621SW 4622SW 4620 4625SW 5601 5602D 5602SW...

Hi to all... we have this system: BCM50 with licenses active: ACTIVE VM seat 12 ACTIVE UM seat 12 ACTIVE IP client seat 12 ACTIVE int digit seat 4 ACTIVE basic cc sw 1 ACTIVE LANCTE seat 1 ACTIVE exp port 1 ACTIVE BT RACE 1 System id 0016CA3DC8CC S/W 1.00.2.04.j BCM 50 rel.1 we have already...

Hi, I have a 9608 SIP with: Application S96x1_SALBR6_2_1r26_V4r70.tar Kernel S96x1_UKR_V12r2130_v12r2130.tar I have download from support avaya this: 9608 H323 V6_2_4 S96x1_UKR_V13r58_V13r58.tar S9608_11HALBR6_2_4_08U_V452.tar I made HTTP server with all configuration file During boot 9608...

Hello, I have an Avaya 9608 IP Deskphone. During the boot, don't write * to Program (like usually), but only Program. If I can't push Program button....it search on HTTP server (not in my PBX).....(blocked) If I push Program button under the display..... then says "Enter command"..... Now...

Hi, we have a LIM MD110 BC12, with NIU, HDU7/2..... 1) There is a command to see the license code mounted on NIU board?? LIDAP; is correctly ?? 2) There is a procedure to cancel license from a NIU board?? And this procedure, is realized by WINFIOL or other external program (NETPNP)?? I...

I'm sorry but i'm cispadano! i've a terrible english :-) Hi, we have an MD110 with 1 LIM and elu32. We must create a simple internal LAN to connect elu32 and manage some VOIP telephone. We must install in our PC server a Linux OS. There are many version of Linux OS, but what's the more...

I have DRG-22 and I connect this to the Lan. It works correctly by the browser explorer, but it doesn't work analogue phone line ports. I want to know if I can connect a simple analogue BCA to the 2 line ports or I need necessary of an Ip phone? Thanks so much and regards.

Hi, i have LSU/4 board and DSU/4 board with eprom firmware damage. Eprom 27C256 of LSU/4 Eprom 27C010 of LSU/4 Eprom 27C010 of DSU/4 Have you the files(.bin .hex) for programming those eprom rightly in this version (/4).

Good morning.. I must to configure a SIU board in a BC9 system, After command: CNHUI:BPOS=2-1-42; EDEQI:DEV=SI-0,EQU=2-1-42-0,PRIO=A; What are the other commands to totally configure the board??? I need it for print the parameter of calling information on the fiol (in TTY mode), after the...

HI, I HAVE MD110 BC11 AND I MUST INSERT ELU32 IN LIM1. WHAT IS THE INSTRUCTION SET COMMANDS TO CONFIGURE THE BOARD ELU32 WITH IP PHONE 4225? I HAVE WITH WINFIOL6.0 SEND THIS COMMAND: CNHUI:BPOS=1-1-50; IPBOI:BPOS=1-1-50,IP=10.10.24.1,MASK=255,255,255,0 THEN I HAVE RESTART THE BOARD...

Hi, excuse me for my bad english..!!! Can I Install a Magazine LBP16 as Magazine-0 ?? what are the position of LPU5, DSU , LSU and IPU?? I have an Hard Disk with software BC9.. Thanks a lot... Alex1978!