Search results for query: *

We have a MICS with 7.0 software with copper lines. We would like to set the ringing on the system, so that it rings different on incomming calls than internal.

We have a 8/24 at a site that loses power a lot. The system started losing it's programming a few weeks ago. we replaced the memory caps in the software sleve. It still looses programming after an extended power outage. Does any one know how long it should retain programming? Is the programming...

We have 4 6218 phones on a Merlin Magix 3.0 system. The phones are outward restricted and are used to answere calls and to call other ext. I have unlocked the button programming but when I try to program an ext it won't work. Is there something in the system that won't allow me to progam these...

I have a fastrad on a site and i am using NRU 11.0. I have a PRI and I am conecting to a site with a T1. This is the second rad at this site. When I try to connect I can only stay in for a couple of seconds. We have tried different DID's and different baud rates.

We have a Merlin Magix 3.0 syatem. When I try to assign the line button positions on the phones I have a hard time getting them on the correct button. Is there an easy way to do this. Is there a template for the phones that show how the butons are numbered. I am using SPM to program.

I have a flash vm that someone installed vml s/w on by mistake. In the past I have been able to short the capacitor on the board and this removes the vml. We have left this one shorted and the voltage is o on cap but when I put new 2.1 sw in it still comes up vml. Any one else had this problem.

I have a Nam and when it tries to boot up it stops and the number code is 7a. Is there a place that I can find these codes or does someone know what this fault code is.

I have a fastrad a a remote site. I have checked using feature 9** that the rad is working and that the correct pswd and baude settings are in it.When I try to connect using Norstar ICS proggramming tools, I get a messsage that the rad is not responding. I have tried to connect from 2 different...

I need a downloadable copy of a norstar T1 rls1 s/w installer guide anyone know if one is avalible online.

I have a merlin magix 4.0 is there a way to print all ext.info. with out puling them out one at a time . I tried printing the whole system and only got the first ext.

is there a way to print all extension info with out entering each one seperatly. I have a Merlin Magix 4.0 sw

I have a Startalk with 2.0.4 sw I need to find out how many min. are on the hard drive. Is this possible.

We have a BCM 400 with several door phones . During regular hours they ring to the receptionist. We need them to ring all phones after hours. Can they be programed to work this way.

I have a Norstar MIC's With 6.0 sw can I program the lines to ring on the external pager