Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: itsmyjob
  • Content: Threads
  • Order by date
  1. itsmyjob

    SIP Trunk Capacity

    Hi, I have a question that I searched Avaya docs for quite awhile and just can't seem to come up with a solid answer. I read that the IP office 500 v2 in basic mode can support a maximum of 20 SIP trunks. I also read that the server Edition can support up to 125 SIP Trunks with 128 call Paths...
  2. itsmyjob

    dtr-8d-1 series vs dtr-8d-2 series

    What is the difference in an dtr-8d series 1 and series 2. I've looked all over for a answer, but could not find one. I know they come in 16d and 32d too. If someone could let me know, I would appreciate it. Thank you very much.
  3. itsmyjob

    IP Phones connecting to SCN network

    Hi, I have a question that would have a number of IP phones remotely that will connect to the main location(500v2 R9.1 Essential edition),the main location is networked to another 500v2 R9.1 essential edition in another city with voice networking license's. If the main switch goes down, is there...
  4. itsmyjob

    External transfer thru embedded AA with flash

    Hi, IP office Release 9.1, essential license, Analog Lines. I set up AA with a selector code to transfer to phantom extension that is forwarded unconditional to a short code that is set to flash and the telephone number that it needs to call. Call comes in to AA, press the selector code digit...
  5. itsmyjob

    Difference in MM710 & MM710B

    What is the difference in the MM710 vs MM710B, looked in the pdfs , but all I found was: MM710B functions,This also applies to mm710. There must be something. Thanks.
  6. itsmyjob

    Shoretel switch to test phones with

    Hi, I.m interested in finding a working ShoreTel switch with the PC that has the software on it with login and passwords to test phones. It will be used as only a test switch for phones. Will need to test from the model 110 to the 655G. Thanks
  7. itsmyjob

    Aura System web interface password reset

    I came across a Avaya mentor video on youtube, How to Reset the Avaya Aura System Manager Web Admin Password. I connect thru putty(SSH)and put admin as login, but can not figure out what the password would be. So i cant try the procedure. Would like to. If I connect thru putty and connect thru...
  8. itsmyjob

    Send outside calls to mailbox with a button

    Hi, I have a IP office 500 v2, release 7. I have route 0, to terminate at extension 201, after 4 rings, outside calls will be answered by 201 mailbox, If I progranm a DND and send all calls button, Press ether button, internal calls go immediately, but external calls still ring 4 times before...
  9. itsmyjob

    500v2 route calls to 3 different outside numbers in sequence

    Customer has 500 v2 release 7, integrated VM. They want the auto-attendant to answer the call, then the caller press a digit, the caller would be routed to a remote cell phone, if that person does not answer, the ip office trys the second number, then third if the second does not respond...
  10. itsmyjob

    Password lost on shoreware director

    The password for our shoreware director was changed, now lost, How can we get past this? We need to maintain our switch. Thanks in advanced.
  11. itsmyjob

    Superconsole message software upgrade required

    I have two 1000 consoles, one has a boot of 1.4, works fine, I have another that has a boot of 1.3. I get a message of software upgrade required. I know where to upgrade the phones themselfs, but I do not know where to go to upgrade the 1000 console. Any clues. Thanks!
  12. itsmyjob

    Mitel 4090

    I have a 4090 cordless phone, I do not believe the base match's the handset, I was told there is a way to sync them together, but I don't know the procedure. Any Info on this is well appreciated.
  13. itsmyjob

    SCN Bandwidth Requirement

    What is the recomended bandwidth requirement for networking 500v2 systems together. I have 4 networking paths between them. What should I not use or things that cause choppyness? Thanks!
  14. itsmyjob

    G250DCP Question

    Hi, I have a few g250dcp, all with the 8300 server but one, I try to login into the ones with the server with root as login and passwood. I fail to login. I found a ggai''''' as a possiable password but still fail to login. Is there a way around this. Also I seen there is a wizaed download, but...
  15. itsmyjob

    avaya 1416 firmware upload error

    I have New 1416 phones that have an error message of: NO APLLICATION FIRMWARE FWIMAGE FILE INVALID DOWNLOADING 077KB I have 3 phones that do this, the others download there firmware OK. I've rebooted the 500v2 and manager is open and running. Problem persists with these same 3 phones. Thanks...
  16. itsmyjob

    Avaya 1616 and 1616I differerence?

    What is the difference for the avaya 1616 and 1616I phones? I know the 1616 works fine on 4.2 (11) or higher, The 1616I needs 6.0 or higher. Why 6.0 or higher, what features do you gain in the 1616I phone? What does The I stand for? Thanks in advance!
  17. itsmyjob

    500 V2 licence

    I have Ip office 500 V1 at multiple sights with all voicemail handled at Main sight. (centralized VM). The licence for the 500 V1 at the remote location has standard to professional licence, I take it for the advanced networking feature, and also has a network licence for 4 channels of H323 to...
  18. itsmyjob

    T7406E Maintenance password

    I have a T7406E nortel cordless phone where the maintenance password is lost, Not the default, I know the backdoor password for the T7406 But not the "E" version. Any help would be greatly apprecited. Thanks in advanced.
  19. itsmyjob

    7960 SIP password

    I have some 7960 SIP phones who's password was changed from the default password of cisco to something else. Is there a password override or some other way to get into the settings? Thanks in advanced.
  20. itsmyjob

    IP Office and serial dongal

    I have 3 IP office's 406V2 units, with three serial dongals with serial numbers on each dongal, Problem is I do not know which dongal goes to what unit. When I look at the licence,s applied in each Ip Office, There is no matching sequence to the serial number on the dongal. How can I match each...

Part and Inventory Search

Back
Top