Search results for query: *

Hi Guys, We need to implement 2 3750 stack switches for an emergency purposes, I've have never configured switches in stack before, i was reading the Cisco guide but i can't find what i need to know, those switches are new, never been configured, OK here is my question: We will have one Master...

Hi Guys, Everytime i reboot my router i got this message, what does this mean?, how can i remove this?, i got 2 wic-1adsl cards on the router. Thanks in advance.

Hi Guys, I have 2 DSL connection and need some help in the configuration, both are working but i'm not sure if my configuration is correct, here is the config: interface ATM0/0 no ip address no ip mroute-cache no atm ilmi-keepalive bundle-enable dsl operating-mode auto ! interface...

Hi Guys; Where can i find info about NAPT-PT configurations on cisco routers?, i'm in a project with a friend, we almost have all the local network running with IPv6 but we need NAPT-PT, i only have /29 subnet assigned by my ISP and we have more than 6 host in our LAN. Thanks in advance.

Hi Guys, I have at home dual adsl connection (7Mbps each) and i need to know if a 2651xm router with 256/48 can handled that?, it will run Firewall, NAT, DHCP and some ACLs and around 10-15 PC's accessing to internet, by cisco the 2651mx can handled around 20Mbps but i'm not sure with all the...

Hi Guys, I'm dealing with this problem, i have a second AP 1120B as a repeater, got everything configured but the dot11Radio 0 is on Reset status and protocl down, i found this on google: CSCsi24761—The 802.11a radio in 1130 series access points sometimes remains in a reset state...

Hi Guys, Attempting to setup a Cisco 1200 to give out private DHCP addresses to its clients. I have added the following statements, however the AP isn't giving out any addresses. ! service dhcp ! no ip dhcp conflict logging ip dhcp excluded-address 192.168.50.1 192.168.50.5 ! ip dhcp pool AP...

Hi Guys, I want to give access to my home cisco lab to a couple of friends to give them the change to practice before the exam, i have setup SSH to accept connections to my access server, i'm the admin and have privilege 15 but i want to assign a lower privilege to my friend because they don't...

Hi, I want to check with you guys the best way to route the traffic coming from internet to a specific interface in Router-A and then to the Router-B (access server), here is the pic: I have this NAT statement in Router-A: ip nat inside source static 192.168.200.2 206.53.50.230 Thanks...

Hi Guys, I got from my ISP a 8 IPs block assigned and i want to use them for different PCs and Servers, right now i have this NAT configuration: ip nat inside source list NAT interface Dialer0 overload ip access-list standard NAT permit 192.168.1.0 0.0.0.255 permit 192.168.2.0 0.0.0.255...

Hi Guys, My ISP provided me with a block of 8 IP addresses, i'm using one 1760 with a wic-adsl to get the service, and one FastEthernet to my internal network, i want to setup a DMZ and for that i added one wic-1enet, what i need to know is how can i do this, i want external access to my DMZ...

Hi Guys, I'm trying to setup my access server but all i got is this: ACCESS-SERVER#R1 Trying R1 (10.1.1.1, 2000)... % Connection refused by remote host Here sh run: ACCESS-SERVER#sh run Building configuration... Current configuration : 1669 bytes ! version 12.3 no service pad service...

Hi Guys. I have 3 2924C-XL-EN shitches and i want to use the FX ports but i'm not sure which fiber connector use'em to buy the cables, can somebody tell me exactly which type of cables i have to buy ?. Thanks in advance.

Hi guys, I got a USB PS121 print server attached to my network, i have 4 vlans and the print server is attached to vlan 4 with ip address 192.168.4.5, i can ping it from the other vlans but when i tried to find the printer (hp officejet k60) attached to the print server i got an error, windows...

Hi Guys; I want to setup SSH to access to my route from the outside (Internet), i was looking on internet but i'm not complete sure, here what i found: There are four steps required to enable SSH support on an IOS router: Configure the hostname command. Configure the DNS domain. Generate...

Hi guys, I got a USB print server attached to my network, i have 4 vlans and this print server is attached to vlan 4 with ip address 192.168.4.5, i can ping it from the other vlans and from the PC's but when i tried to find the printer attached to the print server i got an error, windows can't...

Hi Guys, I have a ISL 1000 ISDN Simulator model ISL-A-01, i want to use it for ISDN LABs and i need help in the configuration, i downloaded the software from the web side and i have communication with the simulator but no idea how configure it, anyone has the same model or worked with one...

Hi Guys, I have a ISL 1000 ISDN Simulator model ISL-A-01, i want to use it for ISDN LABs and i need help in the configuration, i downloaded the software from the web side and i have communication with the simulator but no idea how configure it, anyone has the same model or worked with one...

Hi Guys, I want to buy two more switches to add'em to my home lab but i'm not sure which one, i friend is selling me two 3548 switches but before buy them i want to hear some input about these switches, please i need advice, I know they are EoL, but are these switches good for home labs to...

Hi Guys, Guys, can you help me to see why i can't connect to internet?, i'm running NAT and DHCP in the router, here is the sh run: R1760#sh run Building configuration... Current configuration : 7091 bytes ! version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out...