Search results for query: *

Hardware install manual on line. Looking if anyone has the setup configure doc. There was one and I had it but scanned 7 old hard drives to no avail. Thanks

2 terminals and this is random on both. Quit boots you out of ops and must restart e7. If entering a new order that order is lost. Network issue? Cf card? Strange on both terminals. Been running 3 years no issue.

Auto sequence set to check for open checks then print their report. Issue has started that "open check found on bar" There are no open checks in the system. Any experience with this? Can manually goes into reports and print read. Thanks

Terminal loaded updating the loading ce.... as normal thwen a flash and reboot? Experience with this?

Site upgrading to Res 5.7 and after going through all the hoops from Oracle as to Serial # since they are larger udocs they now say we need 512MB Compact Flash. Units currently have 128 cards. New 512 formatted to FAT on Pc. Place in ws4lx and terminal loads to Micros Blue Boot Screen and sits...

So upgrading a 4.7 dB to port onto a 5.7 machine. Question if the 5.4.licence patch is applied can you now add a addional terminal? Site is upgrading to add 3rd party integrations but also has a winterize patio for the Covid winter and would like a portable terminal as they have a spare backup...

Pinging one way...frustrating sauga continues. On kds no matter the ip entered we get Conflict error. OK let it obtain an ip and see what comes up. 192.168.2.120 Set kds to that and it takes it. From server can ping.2.120 with reply. Ok From kds cannot ping server 192.168.100.100?? Running...

Kds 166 res 5.7 Kds can't.see server won't cal. Test line from kds jack to office switch it's fine. If I change the ip to anything else I get ip conflict. That's what started this venture ip conficts on 3 kds units. Floor terminals ok.

ok have a db that was programmed on a ver4.1 now if we try to use this to update a site with ws5A and ver4.0 it comes up with incompatible error on bootup. So can the 4.1 db files be extracted from 4.1 and imported into 4.o or are we doing separate programming. i know you can go from older...

KDS down. rebooted cotroller loads to white screen. Shows connected. Can ping from office server. Re-Cal Also stop start services Still the same. Thoughts?? Thanks

Res3700 Terminal screen Check detail. Few years ago after you serviced the check and reopened the table the last line was a time serviced line that we could spot check how long the order had ben placed. Cant remember the name of the function or to find the settings to active. Thanks Similar to...

I think this was part of the 3.0 rmf doc when released and it seems I deleted it cleaning up unwanted files. Now I want to use to track some prime products. Anyone can help? Thanks

This is using E7 yes I know 2-8 on for the network card Can ping from terminal to printer. Print check it worked once. Then error pops up power failure?? If send order error pops up network communication failure? So what should be the dip switch settings?? Serial, idn, other? Thanks in...

Built a new box win7 64 bit Micros 5.2 This DB when restored on another pc that has Micros installed restores fine. Box is HP Rp5800 Thoughts Please...

Installing new box. Win7Pro Res 5.2 Should there not be Visual C++ installed. Another Micros box has Visual 5 and 8 installed. So.. That's the question. Thanks

So running a db from a 5.1 ws5 to upgraded 5.2 ws5 and my background img at 800x600 is not filling the entire background as seen in pic. Looked under devices and any other locations and ws is set 800x600. Displays fine on the 5.1 system and fine on the office server in ops. Thoughts with...

What the ??? I hate installing Micros. Server Win7

Win7 pc server or manager procedures. From what threads I could find to read checked IIS, Nic card priorities etc This is getting so tiring....

So Moved a Server from 5.0 to 5.1 to 5.2 All went well Restored a 5.1 db into the 5.2 server. All went well Computer name and ip are correct to the db. All apps config etc work. just ops does not. Thanks in advance

have a win7 server with 5.0 I would like to upgrade to 5.2 and beyond to enable tables for now and ws6 in future. Have software prereq and versions. are the prereq required? I know with 4.0 you could jump some versions to move up. Thanks in advance.