Search results for query: *

I have a customer with a 9600 that just needs me to change x2851 from forwarding to vmail to now goto a different extension instead. I have deleted the forwarding for all conditions (used to goto DSTNO 0 = 3000 = pilot of v.m.) now I assigned DSTNO 18 = x6918, and changed the forwarding...

Had major storms last night, now a customer with an MICS 7.0 has half their phones down, and when I call in and check the port it says deprovisoned (yes it is a STATION port not a line port) Other ports one same card are fine and say enabled and m7310 for them but the ones affected say...

Have a customer that has a KXTD1232 with a TVS225 vmail. The auto attendant answers all calls, when the customer dials "0" it rings Phantom extension number 8000. There are several people thta have a Phantom button that rings at their extension. (everyone answers the operator calls) I have one...

Hi all, installed BST Door Phones before, however cannot find the pdf file ANYWHERE for the DOC itself (door opening controller) I have the doorphone docs just not the controller docs, anybody got a pdf on it?

Have a WY-150 terminal setup for system maintenance, however when I do the AX command it does switch over to the meridian mail, however the terminal doesnt print it out right, it's like it doesn wrap the text or something, so I can't do anything but the key to get back to terminal. It just...

I have a customer that wants order a specific phone number, however the main local providers here all say that they dont own that number. I thought I had a web site at one time that you could type in the telephone number and see who owns it (carrier) any suggestions? Remember we dont have the...

Had a few people tell me it couldn't be done but I thought I would check here. On the Star Talk Flash, I have a customer who would like the directory to be first name. I was told last name was ONLY option on the star talk flash. I have on other voice mails (not norstar) been able to just put the...

Had a few people tell me it couldn't be done but I thought I would check here. On the Star Talk Flash, I have a customer who would like the directory to be first name. I was told last name was ONLY option on the star talk flash. I have on other voice mails (not norstar) been able to just put the...

I have a 9600 with 2 DCC cards (4 dcu ports) 1 is used for on site miantenance and smdr, the other is used for v.m. integration and remote maintenance. The problem recently has been that sometimes when I remotely call in, it locks up the port and then the system shuts down that DCC card and then...

I finally got sick of WinAdmin and purchased the Emanager, got it installed, however I think Windows XP SP2 may of screwed up my WMI files, because when I try to log into a switch it looks like its gonna go then I get FAIL TO CONNECT TO CA. 192.168.255.254 WBEM_E_INVALID_NAMESPACE Anybody got...

Have a customer with a mixture of 7310 phones and I3 phones, the problem is that DID's that are going to the 7310 phones will not fwd to the I3 Phones, caller hears the fast busy as if the DID was not programmed. All other calls will fwd to the I3 just not the DID's. Any suggestion?

I have a school with a nortel option switch and a VSR VoiceCentre 5.0d Voicemail system. School is low on funds so right now replacement is out of the question. Also the vsr has a bridge emulator to emulate the digital phone for the ports on the voice mail. Once a month or so the voicemail goes...

I want to upgrade a customer to 7.0XC because the pahntom dn's would help with their application, however in the manual it briefly describes them but does not show me where to program them. Anybody know the proper way to program these???

Have a customer with the MICS 7.0 , recently they switched to a Sprint PRI Circuit. 1 week after circuit was up they received notification from sprint that several numbers were called to various countries (eg. Saudi Arabia, Pakistan, Morocco, India, Cuba, Cameroon ) Upon getting this news I set...

I have not this in so long, I can't remember the procedures to restrict all phones from dialing 411 and the dreaded 555 info numbers. 411 might be easy but the 555-1212 numbers im thinking I have to add 1-xxx-555 and xxx-555. Any help would be appreciated. Fujitsu 9600 switch.

Wanted: Good simple SMDR info organizer I have used a few in the past but can anybody suggest any good ones out there now (preferably freeware) I have used ones like Trivium Call Analyst but they arent free and i like to do traffic studies and make suggestions to customers on un-needed lines ...

I have 5 schools interconnected, the main school has a fujitsu 9600, all others have options, 2 have the repartee v.m. and one has the vsr voice mail, the other 2 share the repartee with the main bldg. The fujitsu analog ports provide the dial tone for the c.o. ports on all the other systems...

I have 5 schools interconnected, the main school has a fujitsu 9600, all others have options, 2 have the repartee v.m. and one has the vsr voice mail, the other 2 share the repartee with the main bldg. The fujitsu analog ports provide the dial tone for the c.o. ports on all the other systems...

Setting up SMDR so I can look at incoming calls (with caller id) so trace out a malicous call they get periodically. I know how to set it all up so we can trace future calls BUT what about calls from before I set it up. Does the system keep a buffer that i can go out and print out records even...

I have a few Option switches around town that have various bugs ALWAYS flowing but to no detriment to anything, where is the most concise place to defineand get rid of them anyhow? or is there a pdf list somebody have out there?