Search results for query: *

Hi, Has anyone ever tested any third party H.323 gateway with an FXO port on MX-ONE TSW or MD110? Of course we have DRG22i if we want to have FXS ports on the gateway, but what if we need FXO ports?

Hi, I'm looking for some insight into a problem I'm seeing. I have prepared some MX-ONE servers in different locations for a multi-LIM installation. Now before issuing ts_startup from the first LIM, I was checking the connectivity to the other servers, and I noticed that I cannot ping or ssh...

Hi, I have seen this on a couple of MX-ONE 3.2 SP4 systems now. I see in my alarm list that at around 1:00 AM (some nights), alarm code 31 (Too much memory paging)and then code 320 (TELEPHONY CALLS THROTTLED) is seen in all LIMs. I don't believe I have scheduled any tasks manually on the...

Hi, I have seen this in both MX-ONE TSW and TSE systems; when an operator calls an extension who is busy, the operator can see to whom the busy party is talking to (internal or external number). Is there any way to prevent this?

Hi all, I'm experiencing this problem on IP operators (4422 + NOW) where the speech seems to be half duplex (the caller and the operator can't speak at the same time or else they can't hear each other). This is only happening on calls from CO trunks. The system is MX-ONE 3.2 SP4 HF1, IPLU's on...

Hi, Should there be a cable connection between the GCU2 boards in GSM0/A and GSM0/B in a duplicated group switch? I can't find the related schematics in ALEX. Thanks...

Hi, We have a 9-LIM system on TSW SP5, in which some of the LIMs are on remote locations. The problem I'm facing is that I encounter SLIP alarms on some of my PCM links (seen in GJLSP), where these SLIPs lead to DIST MARK in that PCM link and sometimes a "25 SLIP ON GROUP JUNCTOR LINE" alarm...

Hi, Is there any functionality in MD110/MX-ONE which would allow us to route incoming calls based on the calling number (A-number)? For example if the calling number (from PSTN) is 1234567, it should be connected to extension A, but if the calling number is 7654321, the call should be...

Hi, On an MX-ONE 3.2 SP4 system, I have seen that calls made from extensions to the common operator number (OACC with CALT=3), don't hear a ring-back tone. However when the same extension calls the individual operator number, ring-back tone is heard. Can I change this so calling the common...

Hi, The issue I have is on an MX-ONE 3.2 system, although I guess it would be the same in MD110/TSW. I have 5-digit extensions (5xxxx), and a 3-digit PRI code (435) for DID. Since the numbering plan in the PSTN is 7-digit, I have done number conversion (CNVTYP=0, ENTRY=435, NUMTYP=4, TRC=2)...

Hi, Does anyone know what the equivalent for the "ALDAR" command would be in MX-ONE TSE (to prevent an alarm code from showing up in the alarm list printout)? Thanks...

Hi, Has anybody tried configuring a looped H.323 trunk in MX-ONE? I have configured an H.323 route with the same parameters I use when connecting two separate MX-ONE systems (IP networking). In RODDI, I use DEST=900, SRT=4, IP=own_ip_address, then I try calling 900105 (where 105 is a free...

Hi, We have a DPNSS connection between a foreign PBX and MD110 (BC11). A-Number is received on calls from the PBX to MD110. We also have a PRI connection from our MD110 to the PSTN. A-Number is sent on this link also to the PSTN. Now the case we have is that a caller calls from the foreign...

Hi, I have a strange problem with my NIU2 in a TSW system. I can logon to the NIU2 using an FTP connection, I can also log on to niux (both via V24 and ethernet). BUT I can't log on to the system normally; if I try with telnet (ethernet) I get a "Login Rejected" after entering SSSSSSSSS; af I...

I have a problem with my IP operator, the NOW client can log in to the telephony server but the OMD does not. I have set the IP and port as below in the telephony server: MDSH> opsap:lim=1; OPERATOR SERVER DATA LIM IP ADDRESS PORT 1 172.16.100.130 60005 END...

Hi, How can I find out what BC release this is: LZY2030651/8/R1A Thanks...

Hi, I have a question about using duplicated group switch in TSW: As far as I understand, each GJUL4/12 board has 2 PCM links which are identical and are connected to 2 different GSM's. My question is: For a remote LIM, is it possible to transmit these two PCM links via two ports on an SDH...

Hi, We are facing a problem on TSW SP5; When connecting two computers using analog modems which are connected to analog extension lines on the same TSW system, the connection is OK, but when trying file transfer between the two computers, after sending around 50KB of data, the file transfer...

Hi, Its possible to see connected parties with commands like CTCOP, CTDEI, LSCOP. But how is it possible to see who is the A-party (calling) and who is B-party (called)?

Hi, I'm talking about a TSW SP4 system with ELU33/34 boards. When I lift the handset and go off-hook on analog and digital extensions, after around 10 seconds I hear an error tone. How can this time be increased?