Search results for query: *

I want to create mailboxes outside of what is created now 1-8 which are menu node and I want to create different ones. My issue is that we were 3 digit extensions before and they began with 1 and now we are 5 digits beginning with 2**** and in the controller anyone pushes 1 it directly dials...

I have a Linksys SPA2102 adapter hooked to an EnGenius base. I really cant get these 2 to talk . I have the EnGenius setup and registered to devices. Extension 20197 is setup as an 5010 IP device and Generic SIP phone with no luck, i reserved device MAC to assign an IP but can't access via web...

I have setup a few 5485 paging units and notice that ringback will come through speaker then the announcement - can i get around this? MCD 3300 extension 20170 speedcall 0993 number *3720170 I tied with a # and no luck Thanks.

Please read below,we are currently engaged with Mitel/3rd party vendor but looking to the tek-tips community for further assistance/ideas. I the customer am currently experiencing issues with resiliency and fail-over in the Mitel controller world. The basics are we were sold on (2) controllers...

Just completed setting SAN up. We have a HP 2312i and now trying to determine why/how to use the iSNS server for the discovery of storage? 2008 Server Domain Controller is what I imagine I will use as server I have the version 3.0 downloaded for install

Has anyone come across this? I believe it's at the Carrier Level .I called Mitel and they have nothing. The SIP peer profile is set at 330 which I imagine is default.

So we purchased a iscsi san and we want to determine 100% that the iscsi port are that or truly ethernet ports? We know it has mgmt ports per controller but we are puzzled? Thanks, John

I was able to telnet today and see the data flow in putty, looking for a format description. we would like to export the data and format and review call data. any recommendation on call accounting software?

I have definity g3 older software, trying to figure out what my 911 calls go out on? i have read some posts and see some decent info but I'm a flintstone in regard to setup and flow of 911 and don't want to cause myself any issues. we are going to disco some pots lines. JM

what cor/cos covers international calling for agents? is it set at agent or station level? I can't really setermine which covers the intl outbound calling we run a definity g3si.

we can use our pbx to make page announcements through bldg. I thought I found where to change code under feature access codes but no go. My problme is that users have discovered code from htting last number dialed key so i need to change it. I removed the last number dialed button from users...

having trouble with a pretty basic setup, i have 2 agents assigned to 1 skill. In the programming I have attached the call rings while in ready and then disconnects the call rather than going to vmail box in step 12. I can e-mail screen shots of vector setup I have, the upload site is not...