Search results for query: *

Dear All, We are tring to send a FAX Via CS1000 on that we are faceing problems. We cant send international FAX because The protcal send by the FAX or PABX to the remote end speech, according to pur provider if the speech call wont take the FAX isit right. and pls advice me what can i do to...

Dear all, I was facing porblem on the ITG 3.10.92 software, some of the IP Phones i2004 keep on reboot, but some are working fine ...any resion please MAR 08 10:09:15 CSV: Warning ITS4011 10.11.20.134 connecting to node 0, TN: 63-08, 0x608c [Last Reset Reason Not Supported, code: 255] (201)

Hi all, We lost the Boot Floppy disk for our CS1000E CPPII system,does any one have please help us to upgrade the ISM's. We tried in nortel site but no luck.

Hi all, I am tring to upgrade the SECC 4.2 Keycode for 60 to 80 agents but i am getting error on the SECC Server. The Error was "Cannot downgrade features" any idea the problems? Please Note: the key code was correct

Hi All, I am getting the following error some times on the 1000E on that time i cant make any out side calls. Help Please.... SRPT189 Not enough BW for call beetwen 0x65D4 and 0x6CCB SRPT189 Not enough BW for call beetwen 0x65D4 and 0x6CCB SRPT189 Not enough BW for call beetwen 0x6446 and...

Hi All, I am installing a Mini system, on that i cant make a Call from IP phone to IP phone and IP phone to digital also not working. But the phones are getting register and the channels are idel....i dont know why i am not able to call ....help pls

Hi all, I am tring to install the option 11 mini... the incoming call not landing..pls see the trace and suject us...the 30 Channels are showing idel. The DCH was up msdl aslo up. i am taking the clock from the other end(means i am user) CH 11 UIPE_IMSG CC_SETUP_IND REF 00005620 CH 1 23 TOD...

Hi All, I installed a 1000E on that SCPW password was given for international acces, If i use 20 to open 21 to close....if i open the extension and dial the international number, I am getting release and try again...but in authcode was working fine..please any help

Hi all, I am installing a CS1000E on that the out going CLID only shows the pilot number means we are receving the MSC (PTT) last 5 digits and our extension are starting on the range so incoming was working any extension as DID...but out going i cant see the extension number on the CLID its...

Hi, Any one help please..the Station password not working...theFFC was below.. TYPE FFC_DATA CUST 00 CCRS UNR---I changed to CUN,FR1,FR2 and TLD no use SCPL 4 SBUP YES FFCS YES STRL 1 STRG # ADLD 10 DFLT_SCPW NO

HI All, I am tring to give each people to give a SCPW i was creared on the system...but if we used to unlock the phone and try to dial a international call dosent go..where could be the problem.

Hi, I was to make a restriction for making the international call barring pls any one help for this..this is on 1000E

Hi all, From My extension if i call any one the CLI its showing the main pilot number..its not shwoing the extension number...where could be define REQ: prt TYPE: clid CUST 0 SIZE 24 RNGE INTL ENTRY 0 HNTN HLCL DIDN YES HLOC LSC CLASS_FMT DN

Hi, We are installing 1000E..on that we have to install the second cabinet for the 1000T...can any one give sample configuration for the following plss IPM IPR Host and the IPS

Hi, I want make a call baring for each extensions. Means some extensions i have to give internation acces some only local. Its not like 11C i tried with LD 49 its not working...help plssss

Hi All, I am tring to install the second cabinet for 1000T because i need to increase the PRI 5 th. The 1000T Call server IP was 192.168.1.131 and the secone cabinet IP was 192.168.1.135. Please see below the IPM and IPR and advive me what to do?? The IPR MAC 1 was from the second cabinet DB...

Hi all, I am want the 5 th pri on my site. I want add one expansion cabinet on the 1000T how to add. My mail cabinet IP was Elan Ip was 192.168.1.131 and the expansion i gave 192.168.1.132 and i connected the port 1 of each with cross over cable. but the expansion cabinet was not registering...

Hi all, I want to install the 5 th PRI on the 1000T, I have a MGT1000 also i have the SSC card and the expancen daughter board. How can i connect??

Hi all, I am tring to making a GHT on a 1000E for the users. I made a pldn in FFC and in ID 18 GHT i made but the calls are not ringing for the PLDN...any idea pls help

I am getting following on my Windows Server 2003 Server The MAS Link Handler Port#2 service terminated with service specific error 41507. Event ID 7024 Can anyone help on this This error occurs every second in the Systems Log