Search results for query: *

ip access-list ext 100 permit tcp any any lt 1024 permit tcp any lt 1024 any class-map tcp match access-group 100 class-map others match not class-map tcp policy-map tst class tcp set ip prec 4 class others set ip prec 0 in f0/0 service-policy out tst ip access-list ext 100 permit tcp any...

internet to verizon router via fiber verizon router to 2621 router via cat5 2621 router to 2610xm router via serial through frame-relay switch 2610xm to switch via cat5 switch to pc via cat5 There is no connectivity issue, im just wondering why the pc on the 150.4.4.0 network can ping...

ok router works with some flashes but not the ones i want it to work with lol. heres the error message. __________________________________________________________ *power up* System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1) Copyright (c) 2002 by cisco Systems, Inc. C2600...

Heres my situation.... I have a 2621 with a nm-4e and a 3550 48 emi. I have a dsl connection and a cable connection each connected to an ethernet port on the nm-4e. I would like to create 2 lans (one for each connection) using only one fast ethernet port from the 2621 to the switch. Please let...

Other than the physical differences like slot and ram capacity, can someone tell me of some other advantages that the 2801 has over 2621xm.

Interrupt within 5 seconds to abort boot process. Boot process failed... The system is unable to boot automatically. The BOOT environment variable needs to be set to a bootable image. switch: _______________________________________________________ Ok what did I do wrong and whats the cure...

Can load balancing be achieved using 2 different service providers (1 cable, 1 dsl) or can it only work with 2 connections from the same service provider? Thanks for answering all my questions=)

I found the fix for this in this forum before but cant find it now. The problem- there is a long wait time (about one minute) to establish an ip address when I enable any nic connected to the 3550. Please help again! thanks everyone.

I wondering how to specify dns ip servers on 2600 routers without using dhcp pool and/or statically specifying in windows internet properties. Thanks ahead of time.

Hi everyone, I'm wondering if it is possible to connect to the internet through a 2600 router, without using nat or dhcp pool. If this is possible can someone please post a configuration sample for this. Thanks ahead of time everyone.

Hi all, I'm trying to connect 2 computers to the internet without using a switch, I got one working (f0/0) but can't get the other one to get on the internet (e1/2). Below are the specs of the router and module along with config. Thanks ahead of time. 2621 router nm-4e ! version 12.3...

Would like to know the difference between 1. 3550 48 smi with emi image. 2. 3550 48 emi Is one better than the other? Someone please explain the difference. Is the "with emi image" part just a firmware upgrade similar to an updated ios?

My current lab consists of some routers along with 2 2950. My question is, will i be better of with a 24 or 48 port 3550 EMI and why? Thanks for responses ahead of time, this and the cisco router forum been very reliable for answers so far.

is tftpdnld used only in router>crossover cable>pc configuration or can it be used in router>switch>pc configuration too? And if neither of the above are correct settings for tftpdnld can someone please explain just the physical configuration for tftpdnld? thanks (the router i'm operating on...

Just wondering if wic-2t can be installed on the 2801. The hwic 4t is so expensive!

Just wondering if wic-2t can be installed on the 2801. The hwic 4t is so expensive!

Hi, I'm wondering if the 2960 is considered a layer 3 switch, and if it can be used instead of the 3550 in a ccnp lab environment. Do switch spf ports only connect to other switch spf ports or can they be connected to routers too? MY current lab consists of... 1. 2621 2. 2611 3. 2610 4. 2950...