Search results for query: *

Currently I have an operator group configured on my NBX system. This is to ensure that all call are answered once the operator is busy. The other user are complaining that the operator is not doing her job because all call are being routed to their extensions. I checked and found once the...

I have a 3com NBX100, I have noticed for the pass couple of weeks users are being disconnected from the system. This seems to happen in the afternoon at about 12 noon. When I connect the system to my laptop it works, when I dial into the system all is well, I have checked to see if there is any...

I have some new AVAYA I1210 phone to con figure for a BCM450 but I am unable to get into the configuration to setup the phones. From what I am seeing it seems the firmware are different is there a way to down-grade the firmware.

I have a BCM 450 and I would like to configure the system so that once a IP phone is connected to the network the configuration is automatically deployed to the set. The phones I have are i1210.

I have a BCM450 with GATM8 module configured with 6 lines. The card has gone defective two times and it happened after ran was falling and thunder storm. I am now doing some research to see why this could happened. One possible clue is grounding, but I have not seing any independent gounding on...

I have a T7213+KIM connected to a BCM 200 rls 4. Currently on the KIM the extension within the office configured.The problem we are having is that when the users are on their extension the status does not show on the KIM.However if u press the extension Keys on the KIM it dials the extension...

Is there a way to reset the password on BCM 3.7

I have a new BCM50 which I am unable and I am unable to login. I trying to do a level 1 reset but it does not seems to be working. The power light is set to green and the status light is set to red.

I have just gotten a BCM450 and install a GATM8 card.The card is not in slot 1, and configured as a CTM8/GATM8.The cars is then divided into two CTM4's, however it stuck at enabling for the longest time. Do I need to connect the trunks to the card before it enables? 450 ver 5.0

I am in the process of planning a domain migration from windows 2003 to 2008. In the 2003 domain exchange is installed,we are planning to reinstalling the exchange server once the 2008 domain is ready,however we want to perform a phase approach. What I am think of is to create a trust...

I have a option Nortel Meridian running Rls 25.40.The system is displaying BUG6247 error. Can someone instruct us how I get around this error. I know that there is a corruption, but what command do I run to get rid of the error. any help will be appreciated.

I have taken over management of a 3Com® VCX® Connect 100 IP system. Presently the system is configured with a T1 card,FXO and FXS. Trunks.The system is presently open and as such anyone can make calls.The customer would like for me to lock down the system by enable restriction on the system...

I have a school that currently have a BCM 450, they would like to have holiday greeting implemented.I know that I can record another greeting in the table and just login to the system and just change it arround, however they have ask how can this be done automaticaly.

I have a BCM450 installed at a school,they are looking for some type of solution to act in the form of a BEll. I would like to know if there is any feature that could simulate this from the BCM system. I was looking at paging zones but not sure how I would get that working.

I have a windows 2000 domain and I have just added VMware Vsphere to the environment with guess server running windows 2008. I am migrating to the domain to windows 2008 ,however I have ran into a strange problem. I was successful in running adrep /forestprep and domainprep with no issue and...

I am unable to resset mailbox password. I get the following error Unable to save password "The following error occurred , Error 54745 severity 0,attribute:usermailboxpassword." Nb Calpilot system 20i

I am currently proposing a solution I would like to know if it can work. I have a Option 11c with available analog truck cards at head office and at the remote site I am going to put a BCM 50 configured to support 14 analog trunks. I want to allow extension call between the location so I am...

I have a BCM 450 and a 1230 with a 18 KIM module,at present I have 8 analog lines connect to the system. I have added the lines to the 1230 phones. How do I move or assign the lines to the KIM expansion or place some lines on the phone and some on the expansion?

Unable to browse management interface of NBX100.

I have a NBX100 and I have 10 analog lines I have 20 users/handset. I am running two company in the same building. Company A has 5 lines 2 for long distance Company B has 5 lines 2 for long distance I want to be able to allow company A and B to dial out over the lines that are assign to...