Search results for query: *

Hey Guys, Go easy on my im a Cisco VoIP engineer and have a HiPath 4000 question. Management would like reserved DN's to route to a recording that says "You have reached and invalid number bla bla.." Our onsite Siemens techs are telling me that this can't be done with touching each DN. I...

We have two sites. They both have 100 Meg links between them. Each circuit connects to its own router. So: R1/1-------2/1 | | R1/2-------2/2 The IGP is OSPF. We are looking to load-balance these links better in the event that the bandwidth is pegged. We are thinking about running...

So i have two circuits that term to another site. Both circuits term to seperate routers Site1R1----------Site2R1 | | | | Site1R2----------Site2R2 The IGP is OSPF and we want to load balance the circuits in a bi-directional fashion, how would one go about that?

Hey Folks, I will shortly be bringing up a DR location to mirror out HQ office. At HQ we have a public ASN number, we use this ASN to advertise our address space out to the world, we also use this ASN to advertise our local networks to our remote locations via MPLS provider. Can we use the...

so we have a 6509 with the Sup720's in it. The sup's are configured to run in a active/standby configuration. We would like to use both supervisors uplink ports for fiber connetions to downstream switches. Is this possible or can we only use the active supervisors ports?

The is a SoHo - Router and Cisco Phone deployment - Cisco Virtual Office. This code was supplied on the cisco website, im trying to understand how the QoS portion works (i have a good understand of VPN configs im just trying to wrap my head around how the Qos portion works here...)...

I have a Cisco 1751 that we are going to use for backup voice however when i do a sh policy-map QoS int no packets are being tagged as EF, which is causing the voice to cut out. With a similar configuration on a 2811 router the packets tag just fine. What gives. Here is the sh ver and sh run...

I'm trying to create a translation rule that will block all calls on an Voice-Port except calls from a certain string. We are getting lots of telemarketer calls on this number and we want to block all numbers except the block of numbers that we own. Lets say our block of DID numbers that we...

We record our customers calls. And while we have an announcement when they call in to say their call will be recorded. On outbound calls to customers we dont have our sales rep say the call might be recorded. So we have these tone injectors that insert a beep every 15 seconds on the call, but...

So we have an edge router that is doing everything your can possibly think (NAT, Firewall, VPN, MPLS Traffic, Internet traffic etc). We bought some ASA's and want to offload the Firewall and VPN stuff to it. However im having trouble getting my head around the setup. The physical view of the...

Posting it in this forum too in case some VoIP experts are in the house... Currently our SIP trunk from our PSTN provider terminates directly on the 3845. We want to move the termination so it points directly on our edge router (a cisco 3845) which then redirects or proxys the SIP calls to...

Currently our SIP trunk from our PSTN provider terminates directly on the 3845. We want to move the termination so it points directly on our edge router (a cisco 3845) which then redirects or proxys the SIP calls to the call manager from the PSTN. Can someone point in the general direction on...

Ok so i have a friend who works for a company that has cisco call manager 6.1, she has a 7961, anyways lately when she dials my number (and the phone pre-populates) recently dialed numbers it has "Call Ma" on the end of my number before the screen chops off the rest of the word. When she dials...

hey guys, need some help with switch design for a closet switch we have. Inventory includes (2) 24 Port 3524XL (1) 24 Port 3560G (1) 24 Port 3560E Uplinks to the core are (2) Fiber links. Is this a recommended design and what do i need to watch out for with regard to spanning tree. I was...

Hey guys, Is it possible to get click-to-dial in Microsoft office communicator 2005. Is a Cisco Presence Server required? Just wondering, Cheers, Matt

We have Remote Site A that places Tandberg video over IP calls to Corporate. They have been complaining that all calls are very pixelated when there is movement. At corporate the quality to Remote Site A is excellant. I had remote site A place a video call to Remote Sites B - Site A complained...

Hi all again.... I have a 4-Port FXO card on a router and we have 4 pots lines associated to it. When i place a call from it for example to my cell phone. My cell will ring, my IP Phone will not hear ring back. My cell will ring like 2 times and my ip phone will give a fast busy. The same...

We are opening a very small new office and our MPLS connection will not be turned up soon enough. The thought was the put a 2811, 4 pots lines in the 2811, a switch and 4 phones at this site and have the phones go into CM Failback mode. But the phones don't go in to CM Failback mode. The phone...

i setup a remote office this week. The office just has a Cisco 2811 and a data circuit where we send our VoIP traffic back to our call manager at a different site. I had 0 dial-peers configured yet 4 digit dialing was working and PSTN calls worked fine too. (PSTN calls go out our corporate site...

We have a router that we are tagging EF Voice packets for sending over our MPLS network. I've had several complaints that voice sounds robotic. What commands can i run on the router to check that these packets are being tagged correctly? i already found: sh policy-map interface <interface>...