Search results for query: *

What is the part number for the cable connecting the new NIU2/12 and AAU/2 for SNMP, it's an RJ45 at both ends, can't find the cable in TSW SP7 docs????!!!!XXXX TELEC3

I’m having problems with ACL-OCS integration seems like the ACL receives the messages from OCS, but nothing happens after that, I’m running ACL 1.0 SP2. During the ACL setup we are asked for the Domain, UserName and PsssWord, I used the same domain username and password of the widows 2008...

When deploying Mobile Extension let's say a user has 3 extensions in the MX-ONE, a Generic remote extension associated with he's cell phone, an IP phone on he's desk and a VoIP IP client on he's cell phone using AMC+, what is the best deployment architecture: 1. 3 separate extension numbers...

I need to allow caller ID internally but block caller ID for external call over a PRI, except when calling 911 on that PRI where i want to send ANI information or caller ID. TELEC3

TSE 4.0 incoming calls over SIP route are wroking fine but can not get MEX to work, did any one try MEX over SIP route?if so please post needed commands and route configuration please. TELEC3

MX-One 4.0 with MGU in Lite, when getting to the restart phase of the RVA configuration method I get a time out, any ideas? MDSH> new_voice_prompt /myRVA/message001.wav /eri_egx_root/nfs_root/rva/new/message001.wav Success! Please note that in order to activate the new prompts...

TSE 4.0 with Now SP7, when programming an absent code on an IP extension, and calling that extension from another IP extension, the call is diverted to the NOW console correctly but it’s missing the phone number and the absent code (message diversion information), it looks like the caller called...

If an MX-One TSE SIP extension initiates an outgoing call through a SIP trunk will that use any of the RTP resources? is direct media enabled in this mode? TELEC3

Am trying to demo mobile extnesion, I can call the R1 number and use PBX features that works fine, my problme is when calling the remore extension, my Mobile Pbone will ring and the call is dropped after one second or one ring, if i dial the mobile number directlt 9-xxx-xxx-xxxx it works fine...

MTS was running fine on TSE 3.2 SP3 LIM1 then I installed MP on LIM1, MP now is working fine, but when trying to access MTS through http://xxx.xxx.xxx.xxx/mts i get the JBoss web page: JBoss Online Resources •JBoss Documentation •JBoss Wiki •JBoss JIRA •JBoss Forums JBoss Management •Tomcat...

MNS keys are hanging in ON stage, although the monitored extension is idle if i reboot the phone the LED will trurn off, but if i try to end using GEFKE:DIR=,MNS=; not accepted MNS key is busy. TSE 3.2 SP3 and DBC425 V2 phones H323, any ideas? TELEC3

How can I add an external number to a parallel ringing list, with out using Mobile Extension? I was thinking of adding a fictitious number (ADN. Generic extension) and setting external follow me, or immediate call diversion to the external number will this work? TELEC3

Need to test DTMF sending through SIP trunks, I have an MX-One connceted to an SUT server, we verified DTMF are working from MX-One extension to SUT extension through establishing a confrence bridge on the SUT server and dialing 1 to join a confrence, any idea how I can test DTMF from the SUT...

How do i chnage the following cprint out from TSW to a TSE ICFUI:? <ICFUP; INFORMATION COMPUTER COMMON FUNCTIONS DATA UPDATING START TIME IS 01:30 MESSAGE WAITING FUNCTIONALITY IS ALL INFORMATION COMPUTER EQUIPMENT DATA IFCIND IODEV EQU RATE DFMT UPDFCN...

I can not seem to configure RODDI on SP6: <cadap; CALENDAR DATA IDENTITY=TSW-GREEN VERSION=CXP1010130/4/TSWSP06/R7G 15:15:09 THU 11 JUN 2009 END <RODDI:DEST=90,ROU=2,ADC=062610000000025000600000000; NOT ACCEPTED ADC UNREASONABLE VALUE <RODDI:DEST=90,ROU=2; EXECUTED <RODDP:DEST=90...

Am unable to see the ILPU firmware: [code] MDSH> board_list -bpos 1-0-00 Device board position information Boardpos Brdid Individs Signal State Status format 1-0-00 119 32 long active assigned MDSH> board_sw -status -bpos 1-1-00 Device...

Customer has MX-One ESUs and IPLUs on a seperate data network for security reasones, and nopw started deploying IP phones, which are deployed on a non secure LAN, how can we achieve security on the ESU and IPLU and still deploy the IP phones? TELEC3

Is it possible using CMG office web for a an MX-One user to transfer he's extension to an external number with OUT using the PELPI list? TELEC3

Am trying to setup CMG to work with TSE, if I activate anything using *23* on the phone the CMG office gets updates fine, if i cancel anything using the CMG office web that works and i can see the activity back to normal on teh phone, but when i try to set (activite) an activity using the CMG...

Do the server types have to match in a server redundant environment, meaning in a cluster that has an HP server LIM and a ESU classic server LIM, can i have a HP redundant backup server for both LIMs?????!!!!! TELEC3