Search results for query: *

This system has been running for years. Suddenly PRI calls cannot go out. The customer made a change, so I thought they corrupted the database. I uploaded a working config from a few months ago and the result is the same. The system gives me a tone and the calls will not go out. I've checked my...

I'm trying to connect a Snom to an NEC sl2100. I have the Sip third party license. I've created an IP extension 126. I've followed the: Configuring a VoIP Phone Using Automatic Registration on the NEC SL2100 or SL1100 from my distributor. I have an IP address for the Snom and have connected to...

I'm proposing a 2100 to a customer that I'll have TDM phones at the main building. The customer has a remote building that will have IP phones at the building and they want paging horns in the remote building. I'll have a POE switch for the phones and for the IP endpoint for paging. I'm looking...

NECSL2100 with Sip trunks with Pepwave router. PBX is 192.168.9.250, my PC is 192.168.9.101. PCPro is 3.0, PBX is 3.0. I rebooted pc. As soon as I try to connect, I get the cannot connect message. I'm not sure what's going on.

I finally set up an st500 behind an NEC 2100 system and it connects but I have no audio either way any suggestions?

My customer has cordless phones on Ext 109/110. When they hookflash a c.o. call to transfer the call, it hangs up. Is 81.01 where I need to be? Thank you.

I'm looking for a cordless headset for a 4400 telephone. All the possible Plantronics headsets list just about all phones, old and new except the 4400. Needed advice. Thank you.

My customer wants a wireless headset. I'd like to use the Plantronics CS540, but I'm stuck on if I need the Wireless Adapter add-on that connects to the headset jack on the phone. Won't this work on the telephone if I programm a Headset button without the need for the Wireless Adapter? Thanks.

My customer calls into a site that uses an auto attendant. He says the site doesn't hear his tones all the time. I'm trying to increase the tones length. I've searched to increase the tone and found 80-02 in the programming manual to do so. But when I try to change settings on the phone or on...

I have an existing AA that works when the night button is pressed. The selector codes were set to direct extension transfer. The customer wants calling groups for selector code 3,4 etc. I programmed them to go to extension 772 for s.c. 3 and 773 for s.c. 4 I put a few extensions into each...

The call history works, but it only shows InMail as an CID on the ML440 handset. All call are answered by auto-attendant first, it shows name and number on the ringing handset, but no name and number from call history. Is there any work around to show name and number from call history? thanks...

I have to remove (8) DTL-8R-1 telephones on an existing SL 1100 because the phones do not support Caller ID log. Does anyone have a manual to install this on a SL1100 or tips? The system is not on the network. I guess it has to be. Do the phones connect with digital ports? ie ext 101, 102 etc...

I have nec dtl-8r-1 cordless telephones for a customer as main telephones at their desk. They want Caller ID after the call is placed or received,but the phones don't store numbers. Can I install a Caller ID log button on a spare button on these telephones to get the log? Thanks. ----- "Always...

These are so new, I cannot find a User Guide or install manual. Does anyone have one? I believe they're replacing the DTL-8R-1 DIGITAL CORDLESS DECT. Thanks. ----- "Always be yourself. Unless you can be Batman, always be Batman"-------

I installed a system that's 8 x 8 with the CO Expansion card, but the customer wants more extensions. I ordered the 080E card and need to install it on their system quickly, so they are not down long. Will I have to remove that CO expansion card or will the new digital card reside next to the CO...

I have a tenant system or two sets of users on one system. How do I get specific extension to go off hook on lines 3 and 4 first, instead of 1 and 2? ----- "Always be yourself. Unless you can be Batman, always be Batman"-------

I set up an auto attendant, set a selector code of 1 for for dial by name and when using extension 4480 for testing purposes, I get blank air when that selector code is pressed. Awesome. I looked here in Tektips and decided that I need to reload the prompts. (Settings in Manager seem to be...

Can WebPro be utilized to do ALL programming for a Sl1100 instead of using PC Pro? I ask because I'm networking my customers systems so I can do remote programming, if needed, and I'd rather not have to ask the customer permission to install PC Pro on their computers if I don't have to do so...

I have one phone that is being bridged-appearance by 13 other phones. The 13 phones each have 3 bridged-appearance buttons for this phone they're covering. Some phones will ring correctly for the delayed setting that is on each phone but some will not ring at all even though they are programmed...

If all the members of the hunt group are busy and a call rings the group from the auto attendant in Basic Mode, will the Queued message play? Or get a busy? My customers wants the queued message, but I don't know if it will queue? Thanks ----- "Always be yourself. Unless you can be Batman...