Search results for query: *

Guys, I built a SIP trunk between a cisco callmanager 6 box and a sipxecs server in our lab. When I call a phone that is registered to CUCM6 from a phone that is registered to sipxecs server, it works. However when I try to call a sipxecs phone from a phone that is registered to CUCM6, it does...

Is there a way to talk to a Cisco IP phone to get the ip information (subnetmask, default gateway etc.) ot of it? What if the web service is disabled on the phone? is there another way? Thanks

Can Cisco IP Phones support SNMP? I need to pull some network configuration info out of the phones but I have no idea how to do it... Any idea? Does anyone have a MIB name for me? Thanks,

I have been working on this for a while now. I am trying to have CUCM6 push its trace files to an external SFTP server. I tried to mirror everying from RTMT but I still can not get a response to my SOAP requests. The following is my SOAP request: <soapenv:Envelope...

I have been working with CUCM6 for a while now. I would like to configure the box to send all possible SNMP traps to a single destination. As far as I know, I you need to go under serviceability and set the snmp trap destination for diffrent services. Is there a quicker way to configure the...

We are trying to put together a lab network with Callmanager express. I downloaded the proper IOS version and installed all the files onto the router. Question is that how flexible CME licensing is. We installed CME 4.1 on a 2651XM. Like CUCM6, is it usabled up to specified number of phones? Or...

i know we can configure CUCM to send the CDR files to 3 diffrent billing servers but I was wondering if there is anyway to connect to a CUCM6 server from outside and download those cdr files? I have been trying to figure out how I can connect to CUCM (via SFTP or something else) and download the...

I am new to Cisco Callmanager. I set up a network in my lab. I basically have 2 cisco callmanagers. Callmanager 4 and 6. They are connected to the same multilayer switch and they are different networks. I built a sip trunk between them without a problem and I was able to make calls back and...

Is there a way to collect statistics such as delay, jitter, packet loss and CDR via SNMP from Cisco CallManager? Is it possible to use SNMP to read that data directly from the CCM or make it upload it to an external server via FTP or sFTP or TFTP? Thanks,

Hi, I have a Nortel ers 1648. I upgraded it to the latest version of code. I have 2 vlans configured on this unit. I have a multicast server in one vlan and the receivers in the other one. ERS 1648 can support IGMPv1-v2 and PIM-SM mode. I have been unlucky so far. I tried many things but i...

I have been trying to configure my cisco 6500 and some 2950s to send snmp traps to a certain IP address. I enabled all the traps in the system but the only time I capture an SNMP packet with wireshark is the time I enter "show run" in 6500. I made config. changes on the switch but non of them...

We are trying to configure QoS over a T1 link for G.711 calls. We have some nortel baystack 5520s. I am personally stuck at some really basic thing. If you do the math for G.711 calls you can say that a T1 link can carry 17 simultaneous calls. However isnt this only one way. So what about the...

Hi all, I configured QoS on a Nortel 5520 stack. Now I need to know that the voice packets are hitting the right queue in my queue set. Is there a command in CLI of ERS5520 that shows the packet volume for each queue? If not, is there any other way to confirm the QoS configuration? Thanks in...

Hi all, I am having a really weird problem with Nortel WLAN IP telephony manager 2245. I stacked a couple of 2245s in lab environment. Now I need to change the IP address of the master but for some reason I can not see any "master IP configuration" section in 2245 anymore. Can someone please...

Is there a way to configure port forwarding on Nortel secure router 1002.. I have some applications that I want to reach from internet so I need to find a way to forward the specific packets to specific local destinations, thanks in advance

I have been working on an SNMP problem with Nortel VPN router 1750. Does anyone know where I can download an OID table explaining what each value stands for. (a short description for each OID value) I want to use SNMP to pull some specific information out of the VPN router 1750 box. However I...

does anyone know the default admin. password for nortel wireless handsets (6140) we just got them and trying to configure statically thanks,

Hi everybody, I forgot the enable password on my wireless security switch 2380. Is there a way to reset the box? I dont care about the config. on it.. thanks

Hi everybody, I have two sites that I need to connect to each other using optera 5200s. I have 2 OCLD 2,5 universal (Band 3, ch1 and ch2 at each site) and 2 OTR 4G (Band 2, ch1 and ch2 at each site) per each site. I have 8 MXOs; 4 of them are band 3 and 4 of them are band 2 Our customer...

can we use the same Nortel wireless phone configuration cradle that we use for 2200 series, for the 6100 series handsets, as well? thanks in advance,