Search results for query: *

Recently ran up against a customer with very very strict internet connection rules i.e no internet connectivity. Wondering what options besides the normal off line licensing there might be? The customer says they might be able to supply a proxy for us but I have never really used a proxy for...

Looks like there is a product bulletin out there for MCD 7. From what I have been told these are some of the "highlights". June Release - No per node support - Hyper V virtualization - Auto extension numbers assigned to device only sets - Alarms in backup fails - changes in GUI to some forms...

Have a site where we are replacing an older MX controller at Release 9 and going to MCD 4 SP4 on an MXe ( OpsMan still in the picture because of an SX2000 in the cluster ). Did all the upgrading on the new controller so that night of cut we just unplug the old controller and plug in the new...

Looking for the Nortel programming for a QSIG link between 3300 and the CS1000 ( 7.5 ). Have some programming for an older Nortel but wondering if it is still relevant. I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

Looking for information regarding connecting a 3300 ( MCD 6 ) to a Nortel/Avaya CS1000 ( R7.5 ). Knowledge base article for MCD ( R4 ) to CS1000 ( R4 ) but looking for more up to date info. Specifically regarding the CS1000 end. Thanks. I'd tell you a UDP joke but I'm afraid you won't get it...

Is it possible to put two 3300's of a cluster into night service at once? Customer used to be SX2000 connected to 3300. At the end of the day site A ( the SX2000 ) was thrown into Night 1 and the operators went home. Replaced the SX2000 with a pair of 3300's ( needed for the retaining the 10 per...

Anyone have settings for using these two devices as fax end points on the MCD at either release 4 or 5? Looking for an alternative to the linksys and these were cheap enough to make me want to give them a try. They aren't mentioned in the Mitel SIP CoE documents. Thanks in advance. I'd tell you...

Have a customer with 100 sites ( and 110 controllers ). Will be taking them from MCD 4 with OpsMan to MCD 5 with RDN sync. The will need SDS between all the sites. Does anyone have experience with something of this size and what do I need to take into consideration in programming the systems for...

Not sure if anyone has posted on this before but looking for some options. I am building a lab to be able to test a MBG and MCD combo with SIP trunks. Mostly want to be able to work with Wireshark to be able to troubleshoot possible trunk issues. Have no access to real SIP trunks at this point...

Everyone getting there software assurance lined up for the changes coming? i.e no software assurance no product support? I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

Trying to install a CEPT II formatter card in a LW 34 SX2000. Card is not recognized by the SX2000. Trying to remember what issues I ran into many moons ago when I last did this. Any thoughts? Failing that may reflash the card but can't find the procedure on line anymore to do that. I'd tell...

Anyone ever installed vMCD within VMWare Workstaion? I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

The record a call feature on a Nupoint doesn't require any licenses on the 3300. The single biggest problem with communications is the illusion that it has taken place.

Have a number of UPS's that have the ability to send SNMP traps over the network when they detect a problem like absense of AC. The 7100 doesn not have the ability to do anything with these traps as it only reacts to ones from the 3300. Anyone know what I could use to capture and react to these...

Want to do some practise on capturing SIP traces so I am trying to setup trunks from an Asterisk based FreePBX to a 3300 ( MCD 4.1 ). To speed up the process does anyone have a setup for the FreePBX end ( release 2.6 ) that they would care to share? Thanks in advance.

Having problem with a 5550 console. Customer has a number of 3300's in three different cities. All sites in a cluster with IP trunks between. Site A and B have 5550 IP consoles. If a user ( TDM on an SX2000 or IP on a MSDN connected 3300 ) at site C calls either of the 5550 consoles they find...

Returning file objects with RMI I am returning a File object to the client but am unable to access the file to save. How can I read from the file and right to another file on the client side.