Search results for query: *

I have an Epson TM-U220 printer which uses the idn interface to a Micros terminal, the issue is when the printer does not function. When the printer is powered on there is "ticking" sound coming from the cartridge head. The self-test does not work, the paper out light does not come on, the error...

Hi People, I am trying to get the Caller ID for the forward to DN and no the forwarded DN. System - Option 11C 5.0, E1, HMS400 I want to be able to forward or redirect calls from multiple phones to a DN which would go to HMS400, play a message / greeting and then the caller can leave a message...

Hello, I want to configure 2 PRI Cards in a CS1000E 5.5 1 of them to telco (E1) and the other to a E1 gsm gateway. The cards are in slot 3 and 4 of chassis. The one to the telco works fine but the other card wont even enable. I tried setting it up the second card as any other PRI. When i go to...

Hello, we have a SRG50 connected to CS1000E via SIP trunk. SRG Users currently use auth codes to dial out through SIP trunk to hit the SRG T1 to telco. Is there a way to get these auth codes into the CDR from the SRG or have kind of pin type identifier for users to be tracked when dialing out...

Hello, we have a SRG50 connected to CS1000E via SIP trunk. SRG Users currently use auth codes to dial out through SIP trunk to hit the SRG T1 to telco. Is there a way to get these auth codes into the CDR from the SRG or have kind of identifier for users to be tracked when dialing out through SRG...

Hello, I have an issue the calling user id for outbound calls when in normal mode, it shows up as unknown thus having issues with call accounting for SRG. The calls go out via PRI to telco on SRG, main office is CS1000E v5.5 and using SIP. When i look at the line monitor i would see user as...

Hello, We have a NTAK79BCE5 2MB PRI card and trying to use it in a CS1000E v5.50J. When I try to enable in LD 96 i get; DCH000 . stat msdl MSDL 004 0 4 MAN DSBL .enl msdl 4 0 4 MSDL016 D-Channel...

I am using call mini on cs1000e 5.5 and having some trouble getting the auto attendant to dial extensions including the operator. When an extension is dialed from there, there is a long delay and then it returns with the person at the extension is unavailable. Any suggestions on what is causing...

I have an issue allowing dialing out through the SRG PRI from redirected set on CS1000e. When i dial a trace show that the call is going out through the ip trunk the right set digits are being inserted for ZDP, entries are there in NRS for the SRG node but all i get is fast busy. SIPCallTrace on...

I am looking for a GSM Gateway to use with an Option 11C v5.Connection would be via analog trunk card. My two choices so far are: Teles VoIPBox GSM 4 FX or 2N Omega Lite Any recommendations?

I just installed OTM 3.1 system is a CS1000E v5.50J. I have a couple issues: 1. I get a TN Checker error when the PC starts UP (Windows XP Pro) 2. I cannot retrieve IP Phones which are currently programmed on the PBX. There is probably something I am missing. We have only IP Phones. Searching...

I am having some trouble getting this dual forking thing working with ocs 2007 and cs1000e 5.5. The communicator is showing that PBX is not integrated with it and if we call from the communicator to another extension both the desk phone (1120E and 1140E) and the pc client ring but if we try to...

I am trying to confirm the pin out for the MG1000 T1 Device (NTBK65AAE5). I was unable to find anything on this so I am assuming: 24-->1 Receive Ring 49-->2 Receive Tip 23-->4 Transmit Ring 48-->5 Transmit Tip Can anyone deny or confirm this? Thanks

Hello, we have a 2N VoiceBlue Enterprise ip gsm gateway and try to get it working with cs1000e v5.5 using SIP. Do I need any particular licensing? I have tried to do my configuration based on the way I got it to work with asterisk box with no luck. Anyone have any insight into this? Thanks

Hello, I am trying to get asterisk and a cs1000e V5.5 talking. I have worked with asterisk before and have worked with nortel pbx before but nortel + sip is new to me. Can anyone provide me with some guidelines to get me on my way with this. Thanks

Hello, we have an ip trunk going to another location which allows people at the remote location to use the pstn lines at the main site, so it goes from ip trunk to cot trunk. Is it possible to get the extension number of the person at the remote location in the CDR records instead of what...

Ok I have another problem with call restrictions. It is supposed to deny everything and only allow numbers beginning with 8 to pass but i can still dial anything including the 8. CRNO 1 INIT DENY ALOW 8 SPN 8 FLEN 0 CLTP NONE RLI 1 SDRR NONE ITEI NONE TYPE 2616 CDEN 8D CTYP XDLC CUST 0...

I have a problem with performing a trunk to trunk transfer from an analog trunk to a ip trunk, the ip trunk goes to a another site. The extensions at the remote have the ability to use our analog trunks to make calls. I get an incoming pstn call, I press transfer the 1st time i get the beeps and...

I have been looking around the forum to try to find a way to not display the ACOD+member # for incoming CLID from an analog trunk. One suggestion was to add a name for ACOD in LD 95 but had no luck with that. Is this possible?

Need some help understanding the FCR from an old option system VERSION 1411 RELEASE 20 ISSUE 22 ##+ Doing and change over from that to a CS1000E 5.5 Print shows: REQ PRT TYPE FCR CUST 0 CRNO CRNO 0 INIT ALOW DENY 1 3 3 9 5 8 0 7 7 9 0 0 Not familiar with this layout...