Search results for query: *

I have several 7700s DNs with only one feed tray. One by one they have all started jamming on legal-sized media. The first sheet starts to exit from the fuser into the receiving tray, and about 1/3 of the way out, the machine stops and gives a "jam at lower left" error. If I turn the machine off...

I have a Xerox 7700 that showed a "jam at fuser" error occasionally when there was no jam. It used to do it once every few days. Now it does it routinely and often won't reset. Even after removing the sheets (they aren't jammed) and restarting the machine by turning it off and on, it still says...

I have several 7700s and started getting a "Laser Failure" error on start-up on one of the machines. Sometimes it boots up OK, sometimes it gives the error and won't start. Turning it off for a while and trying again usually works, even if I have to do it a few times. Can anyone explain what's...

I have a Phaser 7700 that suddenly started showing a jam when the paper is exiting the machine. Yet there is no jam. The legal sheet is about 3/4 out of the machine and it suddenly stops and says "jam at fuser." When I remove all paper from the paper path, it starts up and does the same thing...

I have to print color on a polyester-based paper (Xerox Nevertear), and my 7700s run too fast - sometimes the toner smears due to incomplete fusing. I'm running on the cover stock (slow) setting and have installed the fuser temp upgrade. I want to slow them down by about 10%. Alternatively, I...