Search results for query: *

Well guys I have about 17 of these ASA installed so far and thought I was getting fairly good with these. I received a new ASA configured it (so i thought) installed it. NAT work on the outside interface .193 for all and assumed we were good and I would SSH in that night and open the ports for...

Hello all, Why is it that I cannot seem to block all traffic from the internal ip of 10.2.2.167 external 207.x.x.61. netstat on the XP station shows massive port 25 access as we as ASDM logs. I cant seem to get it to stop. Its got a Trojan know any good scna removals? Tried, Avira, Hijack...

The VPN is working well and I have users connecting to the 10.5.5.x subnet and the split tunnel (internet access) is working and the have access the internal Exchange and Application servers. Radius is a work in progress and I am working on the IAS side of it, had it working (well at least the...

Its up and running and I get connected but I cannot ping or see the internal DNS server 10.1.1.10 and others on 10.1.1.x subnet. Any ideas? Config below for your reference. mullervpn# sh run : Saved : ASA Version 8.2(2) ! hostname mullervpn enable password passwd names ! interface...

Hello all. I am working on a ASA 5510 after downgrading it to 8.2 from 8.3, no time to learn a new trick. Everthing seems to be working except I cannot ping to a DNS server 68.4.16.30 on a workstation with a static at 10.1.1.4, but I can ping the dns from within the ASA. Go figure, I must be...

Cisco Adaptive Security Appliance Software Version 8.3(1) Device Manager Version 6.3(1) Compiled on Thu 04-Mar-10 16:56 by builders Is there some new Syntax that I dont know about with the new 8.3.1? I keep getting the ERROR below each time I try and configure NAT. SSH, HTTP, ASDM and routing...

Finally i am getting my backordered ASA, I am famlair with VPN remote (less than 10 users) as well as Site to Site. Not very good wiht the GUI ASDM prefer the CLI. I guess I need to build a Radius Server to allow 100 VPN to my network. I am currectly using Windows 2003 RAS works well. I need to...

Anyone using it on 2801 series? Should I upgrade from 12.4(16)? Thanks for your help

I have a ASA running a class C, is there a way to bandwidth limit a single IP and or subnet? Thanks for your help

Any suggestion on alternative products? I have a 2801 and 2611 on hand. VPN using Cisco client software. Do I need a Radius Server? Any ideas? Thanks for your help

Everything works very well with this ASA, but when connected to the VPN using Cisco VPN client we are unable to use the Internet. Here is the config for your reference. I may have missed something. Thanks in advance prasa# sh run : Saved : ASA Version 8.2(2) ! hostname prasa domain-name...

This is a from another thread yesterday that was good. I added second remote site to the central ASA but now I lost the VPN coonection and unable to ping from a PC to the internal (was able to before) 10.0.0.x.. If I were to remove the PULLMAN WARNER it would be fine. warnerasa(config)# sh...

I am struggling getting this site to site VPN up. I have verified my settings and have check varies publications for my accuracy. I have nothing, no activity at all, I show a “show crypto isakmp sa” gives me nothing active. To make it even more confusion I am getting no errors in the ASDM logs...

Hello all and Happy Holidays.... I have a very same ASA running fine on another one of our network. I pre configured this ASA with all the Statics and ACL and I am able to get outbound internet as well as SSH and other managment access. No SMTP, WWW, POP etc...nothing.. I had it up for 20...

Questions; 1)I was wondering if I could use the USB ports to transfer a ASDM.bin, but the cisco web site states "Reserved for future use". IS there a way to access them like flash? http://www.cisco.com/en/US/docs/security/asa/asa80/getting_started/asa5505/quick/guide/install.html#wp1041148...

I have upgraded both ASDM and the firmware to 6.02 and 8.02 and the ASA will go down after many hours of being up. A power cycle brings it back up. But after last night I upgraded the ASDM to setup some monitoring and it came down this morning and I am now heading on site as a power recycle...

I have vnc port 5900 working, but I do not want it open to the rest of the world. Can someone help me with the correct IOS commands to map an internal ip to an external. Example 10.1.1.3 3389 to 207.x.x.59 10.1.1.4 5900 to 207.x.x.60 10.1.1.12 5367 to 207.x.x.61 Also I would like to only...

I have this IOS in my 2801 and I would like to know if this IOS can support Voice I.E. we will add FXS, FXO boards and POE switch for IP phone etc. Communications Manager Express / Cisco Unity Express c2801-entservices-mz.124-10.bin Cisco IOS Software, 2801 Software (C2801-ENTSERVICES-M)...

I have this IOS in my 2801 and I would like to know if this IOS can support Voice I.E. we will add FXS, FXO boards and POE switch for IP phone etc. Communications Manager Express / Cisco Unity Express c2801-entservices-mz.124-10.bin Cisco IOS Software, 2801 Software (C2801-ENTSERVICES-M)...

I have uploaded a new IOS image to the flash and can boot it fine. I was unable to config and startup with the new configs. I had a additional ethernet card that I though was the problem (for 3600 sereis) and I removed it. Now the router is down to bare minimum and I am still not able to get the...