Search results for query: *

We are going to VOIP Telephones, and I'm taking a VOIP course to understand the technology, but it hasn't walked me through, on how to set up a VOIP Phone, I found a web site that showed how to set up a VIOP phone step by step, but I can not locate it anymore, hopefully one of you can help me...

Where in the Nortel Meridian 61C can I program the pbx to accept 4 and 5 extension numbers to ring nortel telephones and IP telephones, the nortel phones have 4 number extension and IP phones have 5 number extension numbers, which ld to make changes and what I should be changing to make this...

Hi all, I don't know if this possible, but here goes, Is it possible for the Octel to be programmed so it will transfer 4 and 5 digit extenisons, I went in and changed it to 5 digit, but it would not except a 4 digit exrenison number, so I had to change it back to 4 digit, the reason for this...

I have a Nortel Meridian 1 61C, need to change the IFC from SL100 to NI2, Software version Seccions 4.5, can you give me the procedure on how to change this, What loads and what order to complete this procedure, I have 1 DCH with daughter board, the daughter board is my DID, any help would...

Hi all, Is it possible to use a T1 (tie), to do the following and if yes, how would I go by doing it. I have T1 (TIE) and it connects two PBX's and have access code to make a call, example: Dial 55 then dial 4554 and you can talk to someone from the other PBX, What I need to know is, is it...

Hi all, hope you can help, I have a Octel 250, I don't know much about this unit, but lately I have been having problems with the unit, here is my problem: customers call from the outside and get the automated attendent, but the customer can not leave a message to mail boxs on the system, then...

[b]Hi all, my company wants to hook up a Hotline, They want to have a phone at the operators desk and another phone at the Fire house, so when the fire panel goes off and shows a fire alarm going off in a building on grounds, the operator just picks up the Red Phone and it rings the other Red...

Hi everyone, I'm trying to put a console about 1200 to 1300 feet away from the PBX (Nortel Meridian 61C, 600 Ohm Switch), at the location I have 29.10 VDC on PWR TN, which is looped around 6,and 7,on the 110 block and the first TN, is on 0, and the second TN is on 1 on the 110 block, I'm showing...

I have a Meridian 1 61c PBX, went to do a system wide upgrade of the firmware,ld 32 fdls 3904, stated it was Building tree... then stated stopped download (5)Friday. Is there a set up or command I missed to get this fdls to work. Let me know the procedure to get this fdls 3904 to work. Can ld 97...

Hello All; I'm getting the software to upgrade to sessions 4.5, I'm at 25.40 now and I have a Nortel Meridian 1 61C PBX. What do I have to do to install the Sessions 4.5 on my PBX, can anyone give me step by step instructions on how to install sessions 4.5, or can you recommend a web site that...

My DID went down, and when I stat, it states a Red Alarm, how do I find out and what the RED alarm is. I got the following information displayed on my computer monitor screen: FHW 001 IO SDI Device Response Timeout BERR 705 Exc 1: Bus Error in task "tSL1" (0x8d12570) SR= 0x 3010, PC=8x4ff1e58...

Hi everyone; Is there a way to hook up a external ringer to a M2250 Console? The volume is all the way and it is not loud enough to hear across a 12 foot room. And the back ground noise is drowning out the M2250 Console when it rings. If not, what is the procedure to set up a M3904 as a...

Hi Everyone; The new owners of my Company want me to change Facility Restriction Levels, the ones in place are not doing what they want them to do, I know that FRL are in the NCOS and RLI, but can't locate where to change the settings. I have a T1, it's a DID, In & Out, they are wanting to dial...

Hi Everyone; I went and removed everything that was in ld 49 under DCNO 0 and went to ld 49 DCNO 0 and reentered 513 458 8790 to ring at 2000 which is the Auto Attendant, but it goes to the Operator, I checked CDB and idc is set to yes and I checked rdb and the idc is set to yes, what step did I...

Hi all; I'm trying to clear out all my entries I put in on ld 49, How do you out dnco 0, the error it gives me states it is still in use, I went to ld 96 and disabled dch 1, went to LD 60 and disabled 14, and went back to LD 49 and tried to out DCNO 0, still states it is still in use, what step...

Hello everyone; Well I have a T1 with a pri card # NT5D12AB Dual with a mother board attached for DCH,in a Nortel Meridian 1 61C, trying to get a number (like 824-345-6592 to ring at the octel 2100 for attendant to answer all incoming calls, went into ld 49 and tried to get 6592 to ring 2100...

Hello Everyone; I was asked a question and did not know the answer, I'm still new at this, we have ten fax machines and they all have there own B1 line(direct trunk)(Example:812-352-xxxx)and the B1's don't go through the Meridian 1 61C and they want the fax lines to go through the switch so they...

Hi All: I have a Nortel Meridian 1 61C and I installed a T1 card so we can go from our PBX to another PBX, by the way of Sprint T1, everything worked fine for months, put in our access number and got dial tone from the other PBX and dial 9 nxx-xxxx and make a local call in another area code, but...

Hi All, I have a Nortel Meridian 1 61C PBX, and I can not dial out from any of extensions, I dial 9 346 xxxx for a local call and all I get is a busy signal, I tested my trunks and they work ok as long as they are not connected to the pbx, when the trunks are connected to the pbx, my ground...

This might be a silly question, but is there a Overlay (LD) to print out the Model and Serial Number of the 61C or is located somewhere on the PBX, also I replaced the cpu on shelf 1 and now I can't get my Pwd2 to work, is there anything I can do? My pwd 1 works ok. Any help would be greatly...