Search results for query: *

Yup, that is where I am at. I input the HLOC and LOC in LD 90, but I am not sure what I am missing. From one 81c to another is 5 digits, and within is 5 digits.

They are all sharing the same switch user name and password, even if the USER user name and password are different. Sometimes, if move from the GUI to the CLI, I have to log out of one or the other to access. This depends on if I was doing something with lets say load 86 on CLI, and then go to...

Below is what I have. I left out most entries that are not populated for brevity. Here is the HLOC/LOC setup: HLOC 999 DMI 6 DMI: DMI 6 DEL 3 CTYP NCHG In AC2: LOC 891 FLEN 8 RLI 23 NPA NXX ITOH ITEI LDN 33333 (made one up) My RLI: RLI 23 NALT 5 ISET 0 MFRL 0 OVLL 0 My RLB (Data entry...

We don't have package 150 installed, so our DSC is limited to 4 digits. I wish I could shoe horn it somehow, but the DNs are all over the place.

Ok, I setup an HLOC (for the 81C) and a LOC (for the BOX). The LOC on the box is pointing towards the same RLI that is working for the outbound (box centric) calls. What do I use for the LDN setting in the LOC?

Our AC1 is "98" for calls going to a separately managed DID. Our AC2 is "99" for calls to the "PSTN" TIE and to the outside world. Can you have more than one for each AC?

Not sure if I need to build a new RDB and RLI for incoming, or what. It would be ok for all of the directly connected 81C folks to dial a code, then the extension. But how do get those incoming "PSTN" TIE calls to the folks on the other box? ANY suggestions would be greatly appreciated. I...

We have kind of weird setup here. Option 81c, they upgraded to CS1000 before I came. We have TIE trunks going to another Option 81c (this is basically our PSTN). I have a TIE setup for a box and running on a PRI using Qsig. From that box, I can dial all of my internal 5 digit extensions on...